Atlantic PV1700 Instrukcja obsługi - Strona 14

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt do trawników i ogrodów Atlantic PV1700. Atlantic PV1700 16 stron. Oasis series skimmer, filterfalls, pump vault, fastfalls
Również dla Atlantic PV1700: Instrukcja obsługi produktu (12 strony)

Drukuj stronę

1. Setting the Bf1600

Apply Atlantic's Silicone Sealant in a continuous, consistent bead along the center of the

threaded inserts. Once completed, return the liner to its dry-fit position.

Attach the supplied flange to the FastFalls, starting with the top screw first, working around

the flange. If needed, use an awl or nail to pierce the liner before inserting the screws. Do

not fully tighten any screws until all of the screws have been installed. Once completed, trim

away the liner on the inside of the flange (Figure F).

Tighten flange screws with a hand held screwdriver only. Over tightening the

screws could strip out the inserts or crack the liner flange. The screws need only to

be snug for the silicone to make a seal.

Apply silicone on the threads of the Male Thread Adaptor (MTA). Screw the MTA into the

spinweld until tight. Use PVC Glue (not included) to glue the PVC flex hose into the MTA.

HIDING THE OASIS FASTFALLS

Position rocks on either side of the Oasis

FastFalls, inside the liner (Figure D). Start

working the rock in and around the

front of the FastFalls, building up to

the lip of the FastFalls, which will

provide support for a lip rock. The

Fastfalls will support the weight of

gravel and rocks, stacked directly on

top of the unit. The FastFalls easily

supports the weight, so consider

covering the whole unit with a single

sizeable overhanging capstone, or

stack individual smaller stones and

gravel on top to completely conceal

the FastFalls (Figure G). For a 'grown-in' look, cover the FastFalls with soil and plant small

evergreens and perennials right on top. The raised lip will keep the gravel or soil from

washing into the water.

Figure F.

Figure G.