2 Save Energy Owl Intuition-PV Pierwsze kroki - Strona 2

Przeglądaj online lub pobierz pdf Pierwsze kroki dla Falownik 2 Save Energy Owl Intuition-PV. 2 Save Energy Owl Intuition-PV 12 stron. Electricity consumption & solar pv generation monitoring - single phase, for homes fitted with solar pv

Drukuj stronę

BEFORE YOU START

Please locate and check that you have a spare

LAN port available on the back of your broadband

Internet router. You will need to plug in the

supplied Ethernet cable. If all of the ports are in

use, you can add more connections by purchasing

an Ethernet Switch / Hub.

You will also need a spare mains socket available

close by for the supplied Plug top mains power supply.

PART NO. CMR180i

MADE IN CHINA

STEP TWO - Power up Network OWL

•

Ensure antenna is screwed, finger tight, onto brass connector on side of

the Network OWL.

•

Select UK or Euro adaptor as required. Fit to the power supply and rotate

90° until it latches into place.

•

CHECK FINGER

TIGHT

STEP ONE - Insert batteries into the

Transmitter

Slide back cover off of the Transmitter and insert

the batteries into the unit. Keep the Transmitter

with you alongside the Network OWL until Step

Six. You should NOT fit the Sensors at this time.

INSERT 3 x AA BATTERY

Plug the power supply into the mains and insert the DC jack

connector into the base of the Network OWL.

•

The green LED will flash rapidly. After about 30

seconds the blue LED will start a steady flash

indicating that it is in Pairing Mode.

•

Quickly move to Step Three.

PLUG IN DC POWER CONNECTOR

GREEN LED

BLUE LED