Aleratec 280110 Skrócona instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Duplikator płyt Aleratec 280110. Aleratec 280110 6 stron.

Preparing Source Data

To make multiple copies using the DVD/CD RoboRacer LS, your data must be in a disc "image" file format (either ISO or NRG

format).

If you are starting with a physical disc that contains your source files:

1. Launch Nero Express from the Start menu in the "Nero 7 Essentials" group.

2. Select "Image, Project, Copy" and then "Copy Entire CD" or "Copy Entire DVD" (depending on the type of disc).

3. If you are prompted to print a label, uncheck "Print label" and then click "Next."

4. Select the DVD/CD drive in your computer containing the disc you wish to copy as "Source drive."

5. Choose "Image Recorder" as the "Destination drive" and then click "Copy."

6. Type in a file name and choose a location to save the disc "image" file and then choose "Save."

7. When the disc is successfully copied, close Nero Express.

If the data you wish to burn is on your computer:

1. Launch Nero Express from the Start menu in the "Nero 7 Essentials" group.

2. Choose the option that corresponds to the type of project you wish to create.

3. Add the desired files/folders to the project and then click "Next."

4. If you are prompted to print a label, uncheck "Print label" and then click "Next."

5. Choose "Image Recorder" as the "Destination drive" and then click "Burn."

6. Type in a file name and choose a location to save the disc "image" file and then choose "Save."

7. When the disc "image" file is successfully created, close Nero Express.

Duplicating Disc Data

1. Launch the RoboRacer LS Utility.

2. Select "Disc Recording" and then click "Go."

3. Use the "Browse" button to locate the desired disc "image" file, select whether it is a CD or a DVD image, and then type the

number of copies you wish to make.

4. Be sure you have the appropriate number of discs in the input bin and click "OK."

Labeling with LightScribe

1. Launch the RoboRacer LS Utility.

2. Select "LightScribe Labeling" and then click "Go."

3. Launch Nero Cover Designer and design your label, or open an existing label project.

4. Click on the "LightScribe" button in the toolbar or go to File, then "Print LightScribe Label."

5. Select the number of LightScribe labeled discs you wish to make, and choose the desired Print Quality.

6. Make sure you have sufficient LightScribe discs in the input bin (label side down) and click "Print" to begin the labeling process.

Note: For more information on Nero Cover Designer, see the on-line documentation in the program's Help menu.

Technical Support Addresses and Phone Numbers

• By e-mail: [email protected] / By Telephone: 1-818-678-0484

Technical Support Group can be reached 8:00 AM to 5:00 PM, Pacific Time, Monday through Friday, excluding U.S. holidays.

• Access is available 24 hours a day, 365 days a year, via:

The World Wide Web at: www.aleratec.com / FAX at: 1-818-678-0483

Specifications subject to change without notice.

Document Number: 9299044_ENG_Rev_D