Electrolux FHWC3655LSA Instrukcja obsługi i konserwacji - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Okap wentylacyjny Electrolux FHWC3655LSA. Electrolux FHWC3655LSA 13 stron. 30 and 36 free-standing range hood
Również dla Electrolux FHWC3655LSA: Instrukcja obsługi i konserwacji (13 strony), Instrukcja obsługi i konserwacji (13 strony)
IMPORTANT
Save
installation
instructions
inspector's use.
The range hood must be connected with copper
wire only.
The range hood should be connected directly
to the fused disconnect (or circuit breaker) box
through metal electrical conduit.
Wire sizes must conform to the requirements of
the National Electrical Code ANSI/NFPA 70 – latest
edition", or CSA Standards C22.1-94, Canadian
Electrical Code Part 1 and C22.2 No.0-M91 – latest
edition** and all local codes and ordinances.
A U.L.- or C.S.A.-listed conduit connector must be
provided at each end of the power supply conduit (at
the range hood and at the junction box).
Copies of the standards listed may be obtained
from:
* National Fire Protection Association Batterymarch
Park Quincy, Massachusetts 02269
** CSA International 8501 East Pleasant Valley Road
Cleveland, Ohio 44131-5575
Power requirement:
120V~, 60Hz, 15 or 20A branch circuit
Intended use
• Your range hood is intended for exhaust operation
only. This range hood is not recommended to be
used over indoor grills. Do not use it to exhaust
hazardous or explosive materials or vapors.
Parts supplied
No. Part
1
2
for
electrical
Qty.
Range hood
1
1
Upper and lower
+
chimney
1
Installing the hood
3
4
5
6
7
8
9
10
11
12
(3.5mm x 10mm)
13
14
Assembly template
Plantilla
15
(estarcido)
Upper bracket
1
Lower bracket
1
Collar
1
Recirculation kit
(optional
1
accessories)
FHWRKT55LS
Bulb
20W, 120V~,
2
GU10 (pre-
assembled)
Long screw
8
(4mm x 32mm)
Wall plug
8
Short screw
4
(4mm x 12mm)
Wood screw
4
(4mm x 50mm)
Stainless steel
screw
2
Short screw
2
(3.5mmx8mm)
10' extension
chimney kit
(optional
1
accessories)
FHW10X55LS
1
(stencilled)
5
GB