Dri-Eaz DRIZAIR 2000 Instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Osuszacz powietrza Dri-Eaz DRIZAIR 2000. Dri-Eaz DRIZAIR 2000 4 stron. 230-volt
Również dla Dri-Eaz DRIZAIR 2000: Instrukcja obsługi (2 strony)

Drukuj stronę

sent, use the optional pleated paper filter to keep more dust

out of the unit; also, inspect and clean the coils as required.

USE A CLEAN FILTER. Keep a clean filter in the unit at all

times to keep out dust. When using a foam filter, clean with a

vacuum, or wash with water and mild detergent and allow it

to dry. When using paper filters, discard the filter when visi-

bly dirty and insert a clean one.

SHINE EXTERIOR: Use a sponge and mild detergent for

regular cleaning. Do not pour or run water onto the unit or

allow water to soak the touchpad control. Bring back the

original shine with a vinyl cleaner-polish.

Periodic Maintenance (as needed)

Make sure unit is unplugged. Remove housing as needed to

permit access to interior parts.

KEEP COILS CLEAN. Dirty coils do not remove water effi-

ciently. Inspect them regularly, especially if operating in

dusty environments. Clean if they are visibly dirty.

First make sure coils are dry, then blow them clean with di-

rect compressed air from both sides of the coil. Do NOT hold

too close to the coils, as high-pressure air may fold the fins.

If sticky or oily residue remain, do a wet cleaning. Use a

squirt bottle to flush the coil with water and a little detergent.

Do NOT run a hose or pressure washer on the coils, or per-

mit water to enter the electrical compartment.

Remove dirt buildup with an aluminum evaporator coil

cleaner available from a refrigeration supply outlet. Follow

product directions carefully.

When cleaning coils, also make sure that the drain tray, drain

hose, and filter cover are free of dirt.

PUMP SYSTEM: Inspect and clean the pump system regu-

larly to maintain effective operation. Remove the four screws

holding down the pump cover. Clean the catch basin. Make

sure the float shaft operates smoothly and does not stick in

the OFF position. Use a pipe cleaner to clean the gravity

drain hose.

WARRANTY

FILL OUT WARRANTY CARD: Please stop before proceed-

ing and fill out the warranty card.

INSPECT ON ARRIVAL: When your Dri-Eaz product arrives,

check immediately for signs of shipping damage. If you no-

tice damage, save the shipping carton for claim purposes,

and immediately report the problem to your supplier and the

shipping company. Also, save the carton for shipping in case

your product ever needs repair at a remote location.

Dri-Eaz promises, to the original purchaser, to perform the

following as needed to correct defects in materials and

workmanship:

1 Year on Parts and Labor: Cover parts and labor costs for

the repair of a Dri-Eaz Airmover, Dehumidifier, Instrument,

Accessory, and other product except Marketing Products, for

a period of one year from the date of purchase.

90 Days on Shipping: Cover shipping costs for the repair of a

Dri-Eaz Airmover, Dehumidifier, Instrument, Accessory, or

other product except Marketing Products, both to and from

the Service Center, for a period of 90 days from the date of

purchase.

LIMITATIONS: This warranty shall not extend to any prod-

ucts showing effects of misuse, accident damage, disassem-

bly, alteration, lack of proper maintenance, corrosive chemi-

cals, improper voltage, unauthorized repairs, use of other

than genuine parts and materials, fire, flood, normal wear

and tear, or any other causes beyond Dri-Eaz Products' con-

trol. The warranty obligation extends only to the repairs or

replacement of parts found, upon Dri-Eaz Products' exami-

nation, to be defective. The foregoing constitutes the entire

warranty and no other warranty, liability, contingency or re-

sponsibility, direct, indirect, consequential or in any way con-

nected with the sale or operation of products is expressed or

implied.

TO RECEIVE WARRANTY SERVICE: You must write or call

for a Return Authorization. You must have the serial number

available. The Dri-Eaz Service Department must authorize all

costs, including shipping, for any Service Centers worldwide.

Please direct questions to an authorized distributor, or to Dri-

Eaz at (360) 757-7776 in the US, or (01908) 562611 in the

UK.