Electrolux ICON E30DD75ESS Instrukcja instalacji - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Okap wentylacyjny Electrolux ICON E30DD75ESS. Electrolux ICON E30DD75ESS 14 stron. External blower assembly for electrolux retractable ventilation systems
Również dla Electrolux ICON E30DD75ESS: Instrukcja instalacji (33 strony), Broszura i specyfikacje (4 strony), Arkusz specyfikacji (1 strony), Instrukcja obsługi i konserwacji (12 strony), Katalog części fabrycznych (6 strony), Instrukcja obsługi i konserwacji (12 strony), Specyfikacja i wymiary (2 strony), Instrukcja instalacji (14 strony)

SAFETY PRECAUTIONS

UTION

CAUTION

UTION

• For general ventilating use only. Do not use to exhaust hazardous or explosive

materials and vapors.

• To reduce risk of fire and to properly exhaust air, be sure to duct air outside – Do

not vent exhaust air into spaces within walls or ceilings or into attics, crawl spaces

or garages.

• This blower assembly is approved for use with the following Electrolux retractable

ventilation systems: E30DD75ESS, E36DD75ESS, E46DD75ESS and E48DD75ESS

only. Use of this blower assembly with any other product or in any other

configuration is hazardous and voids the product warranty.

NOTES

TES

• Consult a licensed ventilation contractor or qualified technician for proper

installation of exhaust ducting.

• Locate the cooking area for minimum cross drafts – away from doors and windows,

when possible.

• Ducts must be of adequate size and duct runs should be as short and straight as

possible. Where turns are necessary, keep turning radius as large and smooth as

possible.

• The ducting must be air tight. Use a minimum of 2 sheet metal screws at every duct

joint. Then, seal the duct joints with a high quality duct tape.

• In duct runs less than 10 equivalent straight feet, the remote blower may interfere

with the cooktop burner performance due to the high volume of air moved. An

adjustable damper (not included) should be installed in the ducting system. The

damper can be adjusted so that proper ventilation and cooktop burner

performance is achieved.

• Installation of duct work should be carefully planned if it is to go under a concrete

slab floor. The duct trench should be boxed to prevent collapse from the wet

cement. Be sure to allow room to run the electrical wiring and conduit.

Safety