Atlantic Technology T90 PBM Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Głośniki do kina domowego Atlantic Technology T90 PBM. Atlantic Technology T90 PBM 8 stron. High performance compact home theater loudspeaker system

Drukuj stronę

Be sure to use a strong wall mounting screw whose head and shaft will fit within the keyhole bracket

opening. Also, be sure to drive the screw well into a stud or use a mounting device (such a molly-bolt)

that is capable of holding the weight of the speaker. Never simply drive a nail or screw into sheet rock

or other wall materials. Always follow these guidelines for safe speaker mounting.

IMPORTANT NOTE: Small self-adhesive rubber pads are supplied with your speakers. They should used as

"feet" when the speakers sit on a shelf, or on stands. When you use the keyhole mounts, place these pads on

the lower rear of the enclosure (remember, the enclosures may be mounted upside down), using a double

thickness (one pad on top of another). This will keep the speaker level when hanging and stop it from

vibrating on the wall.

Listening Levels and Power Handling—IMPORTANT!

The power recommendation for these speakers assumes that you will not operate your amplifier/

receiver in a way that produces distortion. Any speaker can be damaged by a moderately powered

system driven beyond its capability. The harsh amplifier clipping (distortion) that occurs in this

situation can easily cause damage to the speaker system. This type of damage is easily identifiable

through examination of the speaker's voice coil and is not covered by the warranty or extended service

agreement.

Care and Feeding of Your Speakers

Clean your speaker cabinets using a soft cloth moistened with a mild, non-abrasive glass cleaner, being

careful not to wet the edges of the cabinet. Also, be careful not to get any cleaning fluids on the driver

cones or domes. It may be best to dampen the cloth with the cleaner and then wipe the speakers.

After carefully removing the grilles from the speakers by pulling them forward, gently clean them with

a quick pass from a vacuum cleaner with a brush attachment. This should remove any dust

accumulation. Re-attach them by lining up the pegs on the front of the speakers with the holes in the

grilles and pushing firmly but carefully.

Avoid placing your speakers in direct sunlight or near a source of heat that may, over time, damage the

finish.

Important: Save Your Boxes! If you can do so, save the cartons, packing pieces, and plastic bags that

came with your speakers. They will be useful in case you move or have to ship your loudspeakers for any

reason. In any case, save all packing materials until you are certain that the systems have suffered no

damage in shipment. If you find such damage, either visible or internal, contact your dealer immediately for

the proper return procedure.

Atlantic Technology