Electrolux RH36WC55GSB Instrukcja instalacji, użytkowania i konserwacji - Strona 19

Przeglądaj online lub pobierz pdf Instrukcja instalacji, użytkowania i konserwacji dla Okap wentylacyjny Electrolux RH36WC55GSB. Electrolux RH36WC55GSB 21 stron. 30" and 36" free-standing range hood

Drukuj stronę

Care and cleaning

Optional Charcoal Filters

If the model is not vented to the outside, the air will be recirculated through disposable charcoal

lters that help remove smoke and odors.

The charcoal lters cannot be cleaned.

They must be replaced.

The charcoal lters are clipped inside of each metal grease lter (mounting instructions included with

charcoal lter kit).

The charcoal lters should be replaced every 4-6 months (depending on hood usage).

NOTE: DO NOT rinse, or put charcoal lters in an automatic dishwasher.

NOTE: Charcoal lters are not included with the hood.

They must be ordered from your supplier.

Order the needed kit specifying your hood model and width size.

Charcoal lter placement (Recirculating accessories)

Fit the charcoal lter mattress on the upper side of each grease lter.

Use provided springs to x it in place.

NOTE: When removing for replacing for a new one do not remove Fixing Springs, simply pull out and

rotate outwards.

Cleaning

•

Always use the mildest cleaner that will do the

job. Use clean, soft cloths, sponges or paper

towels.

•

grain. Wipe area dry to avoid water marks.

•

After cleaning, place all parts in their proper

positions before using.

The cleaners recommended below indicate a type

and do not constitute an endorsement. Use all

products according to package directions.

Hood Surface

Painted Surfaces: For general care, wipe the outside

of the hood with sudsy water or household cleaners

such as Fantastic

or Formula 409

with a clean soft cloth to avoid water marks.

Stainless Steel Surfaces: Wipe and dry stainless

steel in the same direction as the grain. Avoid using

too much pressure, which may mar the surface. To

cleaners such as Stainless Steel Magic. Do not allow

any cleaning compounds to remain in contact with

stainless steel for extended periods.

Plastic surfaces: Wipe with a moist soapy sponge.

Rinse and dry.

Aluminum Mesh Filters:

washer or by agitating in sudsy water. Ensure that

Anodized Aluminum surfaces: Top cap is not remov-

able. Wash top and underside with hot sudsy water.

, rinse well and dry

Rinse and wipe dry or apply Fantastic

409

wipe clean. DO NOT USE powdered cleaners or

steel wool pads.

or Formula