Attachments
Speeds
Max4
Max4
Notes: It's not recommended to put ONLY seafood or vegetables in the meat grinder, as it will give
juicy/watery result instead of proper ground meat.
Do not use high-f iber food (such as ginger, leek, etc) as it can't be processed.
3 Place the appliance on a flat surface.
4 Tilt the motor head up until it locks by pressing the release lever ( 4 ) upwards.
WARNING! Keep fingers and hands away from areas between housing ( 11 ) and tilted motor head
( 10 ).
5 Place desired tool ( Whisk, dough hook or beater) by pushing it up on the attachment shaft and turn it
counterclockwise until the pin is locked into position.
6 Place the mixing bowl ( 7 ) into the bowl cramping plate ( 12 ) by turning it clockwise to lock into
position.
WARNING! Never operate appliance with the attachments ON unless the mixing bowl ( 7 ) is in
place and motor head ( 10 ) is down.
7 Tilt the motor head down until it locks by pressing the release lever ( 4 ) upwards.
8 Plug into mains.
9 Fill in your ingredients to process.
WARNING! Do not overfill the machine to avoid spillover and motor overloaded. Use the splash
guard to protect against liquid mixtures. Ingredients can be added directly to the bowl via the feed
hole of splash guard.
10 Turn the speed control knob from 0 to desired speed ( between 1-6, corresponding to the tools and
mixture).
WARNING! With heavy mixtures ( example: bread dough), do not operate the machine for more
than 10 minutes continuously. Allow it to cool down for a further 20 minutes before continuing.
PRO Tips: While mixing dough, in order to avoid flour splash, keep the appliance at setting 1 for 60
seconds, then turn to desired speed.
PRO Tips: For pulse operation ( kneading at short intervals), turn and hold the knob to "P" position to
your desired timing. When the knob is released it returns automatically to the "0" position.
11 After mixing completes, turn the knob back to 0.
12 Unplug the appliance.
13 Tilt the motor head up until it locks by pressing the release lever ( 4 ) upwards.
14 Remove the tool from attachment shaft by turning it clockwise and pull off.
15 Remove the mixing bowl from the bowl cramping plate by turning it counterclockwise.
16 Take out the mixture from the mixing bowl.
PRO Tips: Mixture can be taken out with the help of spatula.
www.electrolux.com
Tools
Type of Food
Meat grinder
Ground meat
Sausage/Meatball
Salad maker
Vegetables (carrot, cucumber, pumpkin, etc.)
Hard cheese (cheddar, gouda, etc.)
common meat (chicken, pork, beef)
without bones, skin and muscles
mix meat (chicken, pork, beef includ-
ing seafood) without bones, skin and
muscles
EN
CNT
TH
9
Drukuj stronę