Electrolux UltimateTaste 500 Instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Okap wentylacyjny Electrolux UltimateTaste 500. Electrolux UltimateTaste 500 20 stron. High power blender
Również dla Electrolux UltimateTaste 500: Instrukcja obsługi (21 strony), Instrukcja obsługi (24 strony), Instrukcja obsługi (12 strony), Instrukcja obsługi (16 strony), Instrukcja obsługi (16 strony), Instrukcja obsługi (26 strony), Podręcznik użytkownika (22 strony), Podręcznik użytkownika (23 strony), Podręcznik użytkownika (16 strony), Podręcznik użytkownika (23 strony), Instrukcja obsługi (24 strony)
Drukuj stronę
• Never operate appliance with open lid.
This appliances is intended to be used in household and similar applications such as:
- staff kitchen areas in shops, offices and other working environments;
- farm houses;
•
The mains cable or anything else must not touch the power switch. Failure to do so could result in
- by clients in hotels, motels and other residential type environments;
malfunction of auto-off function and risk of fire hazard.
- bed and breakfast type environments.
•
Avoid coming in contact with steam at the spout of kettle when water is boiling or just after it has
switched off. Do not immediately open the lid of the kettle.
The surface with symbol
The surface with symbol (
GETTING STARTED (PICTURE PAGE 2-3)
GETTING STARTED (Picture page 3)
1
Before first use, wipe the inside and outside of the kettle with a damp cloth.
1
Setting/changing time. Plug in the machine, the display will flash the initial time showing: 12:00. Press
the HOUR and MIN button to set the required time. Time can only be changed under standby mode,
2 Place the base unit on a firm and flat surface. Connect the mains plug into a wall socket. Redundant
cannot be changed under program/working mode. Simply press the HOUR and MIN button, the time
cord can be wound into the bottom of base unit.
changes at once. Note: if you unplug the machine, the time needs so be set again.
3 Press the button to open the lid, pour water into the kettle. Make sure water level is visible in the
2
Place the machine on a flat surface. When starting the machine for the first time, fill the tank with cold
water level indicator, but not exceeding the Max. mark. Fill at least 0.5 L water to ensure that the
water. Start the machine with the START/STOP button. Let a full tank of water pass through the machine
temperature can be shown on the display. Recommended temperatures:
once or twice to clean it, without using paper filter or coffee.
40-60 °C for baby mixtures
3
Making coffee: open the lid and fill the water tank with fresh cold water up to the desired level. There is a
80 °C for delicate teas (green/white)
water level indicator on the water tank and on the coffee jug.
90 °C for instant coffee or soup
4
Insert a size 1x4 paper filter in the filter holder and fill it with ground coffee. For average strong coffee 6-7
100 °C for perfect black tea
g coffee powder per cup is sufficient. Close the water tank lid and place the jug back (complete with lid).
4 Close the lid and make sure it snaps in firmly. Place the kettle onto the base. The display shows the
5
water temperature. After 5 minutes without operation, the display turns off /black.
Setting/changing delay time. Press PROG button, then release the program PROG button, the display
will flash the initial time showing: 12:00 and a clock icon. Set hours by pressing the HOUR button. Then
5 When the display is off /black, press any button to turn on the display, which shows the water
set minutes by pressing the MIN button. Press the PROG button again to confirm, the display will stop
temperature.
flashing time and clock icon. Clock icon is constantly on and the display will go back to show the
6 Press the START button to heat the water to 100°C. The display shows 100°C and after 3 seconds it
current time immediately.
shows the real time water temperature.
6
Setting/changing delay time. Note: If user don't press HOUR or MIN button again, the display will go back
7 To heat water to selected temperature (not boiling): Press the buttons
to show the current time after 5 seconds, and setting delay time is cancelled, clock icon will disappear.
Press the START button to start heating the water. After 3 seconds, the display will turn from selected
7
Start the machine with the START/STOP button. The power indicator light will come on and hot water will
temperature to the real time water temperature.
flow into the filter. If the machine is not turned off manually, the Safety Auto-Off function turns it off after
8 When the water boils or the selected temperature is reached, the kettle beeps 2 times and switches off
40 minutes.
automatically.
8
If the jug is removed, the filter valve prevents coffee from dripping onto the warming plate. (While pre-
9 Press the KEEP WARM/TURBO button to keep it warm at 95 °C for 40 minutes.
paring coffee, the jug must not be removed for longer than 30 seconds or the filter will overflow.)
10 To heat water to selected temperature and keep it warm at the selected temperature: Press the
9
The Aroma Selector extends the brewing time to maximize the flavour extraction and get a stronger cof-
buttons
or
to select temperature and then press the KEEP WARM/TURBO button.
fee for a small number of cups (normally less than 6).
11 When the selected temperature is reached, the kettle beeps 2 times and keeps the water warm at the
10
The machine is compatible with Electrolux PureAdvantageTM water filter. If you choose to use the water
selected temperature for 40 minutes.
filter, it's recommended to change filter after 60 brew cycles. Before using the new filter, place the
12 To boil only 1 cup of water (Turbo function), fill the kettle with 1 cup of water (approx. 200ml), and long
new filter into a container of clean cool water, and let it soak for 10 minutes. Then rinse the filter for
press KEEP WARM/TURBO button for 3 seconds. When the water boils, the kettle beeps 2 times and
10 to 15 seconds under the running tap water.
switches off automatically.
13 The automatic switch off function. When the water has boiled or the kettle is moved from the base,
it will switch off automatically. If you wish to stop it in the middle of the heating/keeping warm
6
process, simply press the START or KEEP WARM/TURBO button again. The white LED light on the
START or KEEP WARM/TURBO button indicates the kettle is operating.
14 When the kettle is lifted up off and put back on the base, the display will show the real time water
temperature and turns off /black after 5 minutes.
CLEANING AND CARE
15 Before cleaning, always unplug the appliance. Never immerse the kettle or base unit in water. Just wipe
with a damp cloth, using no abrasive detergents. Occasionally rinse out the kettle with clean water.
16 To clean the mesh filter, grab the strainer insert and lift out. Cleaning the heating plate – superficial
spots of rust may appear on the base unit. Remove with a stainless steel cleaning agent.
www.electrolux.com
: Caution, hot surface are liable to get hot during use.
) : Caution, Surface becomes hot during use.
or
to select temperature.
www.electrolux.com
EN
EN
CNS
CNT
KR
TH
5