20 www.electrolux.com
Refrigerator operation
CONCERN
Appliance will not run
It is normal for the freezer fan not to
operate during the automatic defrost cycle,
or for a short time after the appliance is
switched on.
Compressor motor seems to run too long
At normal room temperatures, expect your
motor to run about 40% to 80% of the time.
Under warmer conditions, expect it to run
even more often.
The exterior of the appliance is warm or hot
to touch
This is normal because the appliance
transfers heat from the inside out through
the outer panels and the divider between
the doors.
User interface will not respond
To ensure settings are not accidentally
changed the user interface will go into
sleep mode when not in use. Press any
button to wake user interface
Alarms Sounding
Frost build up
Odours
Lights not working
The LED lighting is designed to dim
automatically if the door is left opened
for more than 5 minutes and turn off
completely if the door is open for more
than 7 minutes. Closing the door will reset
the timer.
The LED lighting is also designed to turn
on gradually.
WHAT TO DO
Ensure that the cord is plugged into a live power outlet and outlet is switched on.
Ensure that the household circuit breaker has not tripped or that the fuse has not
blown.
The appliance maybe in defrost mode, check again in half an hour.
Ensure that the doors are not held open
Check that large amounts of warm food have not just been placed inside the
appliance.
Note that the appliance will run more than normal just after you install it or when
adjusting to temperature setting changes.
Ensure the appliance has the external clearances recommended in the section
"Installing your new appliance".
The exterior of the cabinet will be much warmer on warmer days it may even feel
hot to touch, as the appliance is working harder.
Check that the user interface is in awake mode, refer to section "About the user
interface".
Check that the user interface is not locked, refer to section "About the user
interface".
If the user interface is frozen turn the appliance off for five minutes for the memory to
clear, then turn back on.
Check that the user interface is not in Sabbath Mode, refer to control instructions.
(I&W models only).
Check that all doors are fully closed.
Ensure that the over temperature alarm is not being activated by hot food placed in
the freezer.
Check if the drinks timer has ended, refer control instructions.
Check if the Filter Replacement alert is activated, refer control instructions.
(I&W models only)
Check that all doors are fully closed.
Ensure that the doors are not opened too often.
Ensure that the return air vents are not blocked with packaging.
Ensure the seals are clean and not obstructed.
The interior may need cleaning, refer to cleaning guide.
Ensure that food is stored correctly as some food, containers and wrapping can
produce odours.
Check appliance for old or unusual food.
Ensure that the cord is plugged into a live power outlet and outlet is switched on.
Ensure that the household circuit breaker has not tripped or that the fuse has not
blown.
Check that the user interface is not in Sabbath Mode, refer to control instructions.
Check the appliance features section to determine lighting configuration for your
model. Check that the doors are closed completely
Drukuj stronę