Electrolux # Instrukcja obsługi i konserwacji - Strona 25

Drukuj stronę

Electrolux # Instrukcja obsługi i konserwacji

USING THE SELF-CLEAN FEATURE

Adhere to the Following Cleaning

Precautions:

• Allow the oven to cool before cleaning.

• Wear rubber gloves when cleaning any exterior parts of the

oven manually.

During the self-cleaning cycle, the outside of the range can

become very hot to the touch. DO NOT leave a small children

unattended near the range.

Before cleaning any part of the oven, be sure the oven is turned

off. Wait until the oven is cool.

CAUTION

UTION

The health of some birds is extremely sensitive to the fumes given off during the

self-clean cycle of any wall oven. Move birds to another well ventilated room.

DO NOT use commercial oven cleaners or oven protective coatings in or around any part

of the self-cleaning oven. DO NOT clean the oven door gasket. The gasket on the oven

door is essential for a good seal. Care should be taken not to rub, damage or move the

gasket. DO NOT use any cleaning materials on the gasket. Doing so could damage it. DO

NOT use aluminum foil to line the oven bottom. This may affect cooking or foil could melt

and damage the oven surface.

A self-cleaning oven cleans itself with high temperatures (well above cooking

temperatures) which eliminate soil completely or reduce it to a fine powdered ash you can

whisk away with damp cloth.

Preparing the Oven for Self-Cleaning

1. Remove any excess spillovers in the oven cavity before starting the self-cleaning

cycle. To clean, use hot soapy water and a cloth. Large spillovers can cause smoke or a

fire when subjected to high temperatures. DO NOT allow food spills with a high sugar or

acid content (such as tomatoes, sauerkraut, fruit juices or pie filling) to remain on the

surface as they may leave a dull spot even after cleaning.

2. Clean any soil from the oven frame and the door liner (see illustration). These areas

heat sufficiently during a self-clean to burn soil on. Clean with hot soapy water.

3. Remove all utensils and any foil. These items cannot withstand high cleaning

temperatures.

4. Oven racks and oven rack supports must be removed. If they are not removed the

self-cleaning cycle cannot start and the " Racks" Indicator Light will begin to flash

indicating that you must remove the racks and rack gliders with the supports before

starting the clean cycle. When the cycle has finished and the door can be opened,

replace the oven the oven rack supports and oven racks.

Care & Cleaning

DO NOT

Hand

Clean

Door

Gasket

DO Hand

Clean

Frame

DO Hand Clean Door Area

which out of the Door Gasket