Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held
more secure than by hand.
Keep your workplace clean. Blends of mate-
rials are particularly dangerous. Dust from
light alloys can burn or explode.
Avoid unintentional switching on. Ensure
the On/Off switch is in the off position be-
fore inserting battery pack. Carrying the
power tool with your finger on the On/Off
switch or inserting the battery pack into
power tools that have the switch on invites
accidents.
Do not open the battery. Danger of short-
circuiting.
Protect the battery against heat, e.g.,
also against continuous sun irradiation
and fire. There is danger of explosion.
In case of damage and improper use of the
battery, vapours may be emitted. Provide
for fresh air and seek medical help in case
of complaints. The vapours can irritate the
respiratory system.
When the battery is defective, liquid can es-
cape and come into contact with adjacent
components. Check any parts concerned.
Clean such parts or replace them, if required.
Use the battery only in conjunction with your
Bosch power tool. This measure alone pro-
tects the battery against dangerous overload.
Wear protective gloves when changing ap-
plication tools/accessories. Application
tools/accessories become hot after pro-
longed usage.
Do not scrape wetted materials (e. g. wall-
paper) or on moist surfaces. Penetration of
water into the machine increases the risk of
an electric shock.
Do not treat the surface to be worked with
solvent-containing fluids. Materials being
warmed up by the scraping can cause toxic
vapours to develop.
Exercise extreme caution when handling
the scraper. The accessory is very sharp;
danger of injury.
Bosch Power Tools
Functional Description
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or
serious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
Intended Use
The machine is intended for sawing and cutting
wooden materials, plastic, gypsum, non-ferrous
metals and fastening elements (e.g. nails, sta-
ples). It is also suitable for working soft wall tiles
as well as for dry sanding and scraping of small
surfaces. It is especially suitable for working
close to edges and for flush cutting. The power
tool must be used with Bosch accessories only.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Battery unlocking button
2 Battery
3 Button for charge-control indicator
4 Battery charge-control indicator
5 Thumbwheel for orbit frequency preselection
6 On/Off switch
7 Venting slots
8 Tool holder
9 Plunge saw blade*
10 Clamping bolt with spring washer
11 Allen key
12 Sanding plate*
13 Sanding sheet*
14 Felt ring of the dust extraction*
15 Retaining clip of the dust extraction*
16 Vacuum connection*
17 Dust extraction*
18 Vacuum hose*
19 Extraction adapter*
*The accessories illustrated or described are not in-
cluded as standard delivery.
English | 19
2 609 140 535 | (26.5.08)
Drukuj stronę