Electrolux 900258447 Instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odkurzacz Electrolux 900258447. Electrolux 900258447 29 stron. Bagless canister vacuum cleaner

Drukuj stronę

ENGLISH

Thank you for choosing Electrolux Pure C9 vacuum cleaner. Always use

original accessories and spare parts to get the best results. This product is

designed with the environment in mind. All plastic parts are marked for

recycling purposes.

BEFORE STARTING

•

Read this manual carefully.

•

Check that all parts described are included.

•

Pay special attention to the safety precautions!

DESCRIPTION OF PURE C9 VACUUM CLEANER

A. Display (see versions later)

B. Filters lid

C. Fine dust filter

D. Pre-motor filter

E. Parking slots

F. Power cord

G. Carry handle

H. Cyclone compartment and

nose cone filter

I. Air channel

J. Dust compartment

K. AeroPro 3in1 tool

L. AeroPro hose

M. AeroPro handle (see versions

later)

N. AeroPro telescopic tube

O. Parking clip

P. Display for models with rotary

knob manual control*

Picture page 2-6

HOW TO USE THE VACUUM CLEANER

SCheck that all filters are properly placed before using the vacuum

cleaner.

Insert the hose into the cleaner (to remove it, press the lock buttons

and pull). Insert the hose into the hose handle until the lock button

clicks (to release it, press the lock button and pull).

Attach the telescopic tube to the nozzle. Attach the telescopic tube to

the hose handle (to remove it, press the lock button and pull).

Adjust the telescopic tube by holding the lock with one hand and

pulling the handle with the other hand.

3IN1 ACCESSORY TOOL

You can fasten the clip-on holder and 3in1 tool under the handle to

have it easily accessible. The tool has 3 functions, see pictures on next

page.

CHANGING THE BATTERIES*

Nozzle with front lights*: Before first use, remove the protective film

(on top of the batteries). Change batteries when front lights start

blinking fast. Use 2 AA batteries.

Handle with remote control*: Change battery when light indicator

turns red or is not responding when pressing any button. Use only

batteries type LITHIUM CR1632.

NB: Remove the batteries from the product before scrapping. Follow

your country's rules for collection of batteries and electrical products.

START/STOP THE VACUUM CLEANER AND ADJUST SUCTION

POWER

Pull out the power cord and plug it into the mains. Press the ON/OFF

button to turn the cleaner on/off. Models with remote control can also

be operated by the ON/OFF button on the handle.*

After cleaning, push the REWIND button to rewind the cable.

Adjust suction power (manual control models): Turn the rotary knob

on the cleaner or use the air valve on the handle.*

Adjust suction power (remote control models): Press +/- button on

the handle. MIN/MAX and symbols indicators on display will show

level of power.*

VACUUMING WITH THE UNIVERSAL NOZZLE (V*, W*)

Change nozzle setting with the pedal. Icon illustrates recommended

floor type (hard floor or carpet).

FlowMotion LED nozzle*: Move the nozzle forward. The front light

turns on automatically after a few seconds. When the nozzle is not

used, the light turns off automatically after a few seconds.

www.electrolux.com

Q. Display for models with

remote control*

R. AeroPro Classic handle*

S. AeroPro Ergo handle*

T. AeroPro Remote Control

handle*

U. FlowMotion nozzle*

V. FlowMotion LED nozzle*

(with front lights)*

W. AeroPro Turbo nozzle*

X. AeroPro Mini Turbo nozzle*

Y. ParkettoPro nozzle*

Z. AeroPro FlexProPlus nozzle*

AA. AeroPro Long crevice

nozzle*

* Certain models only

PARKING POSITIONS, MOVING THE VACUUM CLEANER

Use parking position (1), at the back of the vacuum cleaner, when you

pause while vacuuming.

Use parking position (2), underneath the vacuum cleaner, to carry and

store the vacuum cleaner.

The vacuum cleaner has two carrying handles.

EMPTYING THE DUST COMPARTMENT

Empty the dust compartment when the level of dust has reached the

maximum limit ("MAX"-mark).

P ress the release button and pull to remove the dust compartment.

Hold the dust compartment over a dust bin. Press the unlock button

underneath the lid, open the lid by swinging it outwards. Empty dust

into the dustbin. Refit in reverse order.

REPLACING THE FILTERS

Pull the FILTER button to open the filter lid.

Clean the fine dust filter after six months of use. Pull the tab on the

frame to remove the fine dust filter. Rinse the filter under running

water.

NB: Do not use cleaning agents. Let the filter dry completely (min. 24 h

in room temperature) before putting back !

Press and slide the lock mechanism to the right to release the pre-

motor filter. Remove the filter by pulling the filter frame tab.

Clean the pre-motor filter after twelve months of use.

Only use original s-filter PureAdvantage, ref: EFSXXX. Rinse the inside

(dirty side) in lukewarm tap water. Tap the filter frame to remove the

water. Repeat the process four times.

NB: Do not use cleaning agents. Avoid touching the filter surface.

Let the filter dry completely (min. 24 h in room temperature) before

putting back ! Change the washable filter at least once a year or when

it is very dirty or damaged.

After replacing the filters, close the filter lid until it is clicked back into

place.

Cleaning the nose cone filter: the nose cone filter is located inside the

cyclone compartment. Clean the nose cone filter if dust has entered.

Pull the nose cone filter to remove. Remove dust with your hand.

Clean under running water if heavily soiled. Refit in reverse order.

NB: Do not use cleaning agents. Let the filter dry completely (min. 24 h

in room temperature) before putting back!

CLEANING THE UNIVERSAL NOZZLE (V*, W**) AND THE TURBO

NOZZLE (X*)

Disconnect the universal nozzle from the tube. Clean with the hose

handle.

Disconnect the turbo nozzle from the tube and remove entangled

threads etc by snipping them away with scissors. Use the hose handle

to clean the nozzle. *

Enjoy a great cleaning experience with Pure C9!

Electrolux reserves the right to change products, information and

specifications without notice.