Bosch BCH3 25 Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odkurzacz Bosch BCH3 25. Bosch BCH3 25 18 stron.

Drukuj stronę

Using the hand stick vacuum cleaner

Vacuuming

Fig.

Actuate the sliding switch in the direction of the ar-

row.

Controlling the suction level

Fig.

Slide the sliding switch into the required position in

order to set the suction power:

Position 1

Vacuuming with the electric brush switched on.

For routine cleaning tasks on all surfaces.

The appliance achieves the maximum run time at

this level.

Position 2

Vacuuming with the electric brush switched on.

For stubborn cleaning tasks on all surfaces (carpets,

in particular).

The appliance achieves a shorter runtime at this le-

vel.

Runtime

Like every other Li-Ion battery the battery is subject

to natural wear as well. That means the battery ca-

pacity and thus runtime decrease over time. This is a

natural aging process and not the result of a material/

production failure or a product defect.

On normal mode with

electrical nozzle for

normal cleaning tasks

Turbo mode with

electrical ﬂoor nozzle or

hand-held for demanding

cleaning tasks

Fig.

During short pauses in vacuuming, the appliance can

be left standing anywhere in the room. To do this, tilt

the vacuum cleaner forwards slightly in the direction

of the nozzle.

Caution: When the appliance is left standing, it

must be switched off because, if the brush is

turning while the appliance is standing still, it could

cause damage to the ﬂoor covering.

BBH3/BCH3

25,2V

Up to 55 min.

Up to 20 min.

Using the hand-held cordless vacuum

cleaner

Fig.

Unlock the hand-held cordless vacuum cleaner by

pressing the release button and remove it from the

hand stick.

Vacuuming with accessories

Fig.

Crevice nozzle

For vacuuming in difﬁcult-to-reach places and over-

head.

Open the accessory holder using the recessed grip

and remove the crevice nozzle. Place it on the air

intake opening of the cordless handheld vacuum

cleaner and click into place.

The crevice nozzle can be extended as required. To

do this, press the unlock button, pull out the crevice

nozzle and engage it in the end position.

After use, push the crevice nozzle together again,

place it in the accessory holder and close the holder.

Fig.

Combination nozzle

Combination nozzle with furniture brush and uphols-

tery nozzle for vacuuming window frames, cup-

boards, furniture, etc.

Open the accessory compartment and remove the

combination nozzle. Place it on the air intake ope-

ning of the upright vacuum cleaner and click into

place.

The furniture brush attachment can be pushed to the

side. The upholstery nozzle is located underneath.

The combination nozzle can also be placed on the tip

of the crevice nozzle.

After use, place the combination nozzle back in the

accessory compartment for storage, close the ac-

cessory compartment, clicking it into place.

Charging the hand-held cordless vacuum cleaner

Fig.

To charge the hand-held cordless vacuum cleaner,

insert it into the hand stick and lock into place. Make

sure that it is seated correctly.

After using the appliance

Fig.

Switch off the appliance after vacuuming.

Emptying the dust container

In order to achieve the best possible vacuuming re-

sults, the dust container should be emptied after every

use or, at the latest, when dust at one point in the dust

container has reached the marking.

We recommend that you not ﬁll the dust container bey-

ond the marking, as this leads to considerable soiling

of the ﬁlter.

* Depending on model