Atlas AH6565S Broszura - Strona 4
Przeglądaj online lub pobierz pdf Broszura dla Głośniki Atlas AH6565S. Atlas AH6565S 10 stron. High-performance, constant directivity, 8", 12", and 15", two-way, indoor/outdoor loudspeaker systems ah series
Również dla Atlas AH6565S: Arkusz specyfikacji (4 strony), Instrukcja obsługi (12 strony), Instrukcja instalacji (12 strony)
Drukuj stronę
AP Series
in indoor and outdoor public address, intercom, security, and industrial signal system applications. Cost-effective,
all-purpose units incorporate high-effi ciency compression drivers to project through high ambient sound levels and to
cover long distances at minimum installed cost. U.S. made models assure superior intelligibility and service reliability.
Units are metal and plastic construction.
transformer.
Industry Standard Omni-Purpose Loudspeakers
AP-15
versions for medium and high-powered sound distribution. Selection includes 8 Ω models for auxiliary and mobile
loudspeaker use and 70.7V / 100V transformer models with screwdriver-adjust power tap selection for a variety of
sound and signaling applications. All include the Omni-Purpose
provisions for surface/strap mounting to pillars and I-beams. gray baked epoxy fi nish. Model
Beige fi nish.
AP-15/AP-30
Recessed Flange-Mounting Loudspeakers
APF Series
applications. Flange mounting units may be installed fl ush to a panel or recessed into wall or ceiling surfaces. For
aesthetic consideration and retrofi t convenience of existing cone loudspeaker installations, models will accept any
6" or 8" diameter recessed mounting baffl e (Note: 8" baffl e mounting requires model
APF
deep minimum opening and includes combination 25V / 70.7V / 100V transformer with screwdriver-adjust power tap
selection. Finished in gray baked epoxy.
Exponential Loudspeaker
APC-30T
APF-15
molded plastic bell for sound directivity. Transformer includes a screwdriver-adjust power selection with a 45 Ω tap
for intercom and talk-back use. It also features the Omni-Purpose
provisions for surface/strap mounting to pillars and I-beams. Finished in gray baked epoxy. For constant directivity
performance, see APX Series.
Radial Loudspeaker for Suspension Mounting
APR-30AT
transportation, manufacturing, service, recreation and sports centers. Equipped with a combination 25V / 70.7V / 100V
transformer with screwdriver-adjust power selection including a 45 Ω tap. Provision for suspended ceiling installation
is included. Finished in gray baked epoxy. Includes conduit adapter.
APC-30T
Bi-Directional Twin Horn
APT-34AT
corridors, stairwells and walkways in commercial, institutional and industrial applications. Twin horn assembly delivers
30 watts of power with a single compression driver and provides 100˚ sound dispersion in each direction. Includes
the Omni-Purpose
100V transformer with screwdriver-adjust power selection including a 45 Ω tap. Finished in gray baked epoxy. Includes
conduit adapter.
APR-30AT
APT-34AT
30
Professional Omni-Purpose Loudspeakers
environment-resistant loudspeakers are the world standard for voice, music, and signal transmission
/
AP-30 Series
Patented environment-resistant, double re-entrant loudspeakers are available in 15 and 30 watt
High-effi ciency, 15 watt loudspeakers are designed for recessed installation in sound and alarm system
Series accessories, this section.) The
High-power 30 watt loudspeaker with extended low frequency response is equipped with a wide-angle
30 watt loudspeaker with 40˚ circular sound dispersion is designed for overhead installation in industrial,
Surface-mounting loudspeaker with bi-directional sound dispersion provides concentrated coverage in
bracket and provisions for surface / strap mounting. Equipped with a combination 25V / 70.7V /
®
Model
UL
Power
Nominal
Rating
Frequency
AP-15
1480
15 watts
400 Hz – 14 kHz
AP-15T(C)
1480
APF-15
1480
15 watts
600 Hz – 14 kHz
APF-15T
1480
AP-30
30 watts
300 Hz – 12 kHz
AP-30T(C)
APC-30T
30 watts
300 Hz – 12 kHz
APR-30AT
30 watts
300 Hz – 12 kHz
APT-34AT
30 watts
400 Hz – 12.5
kHz
* Measured at Rated Power, 1 Meter (avg)
** Angle Shown for -6 dB, 2 kHz Octave Band
*** 15 watts Transformer Power Taps: 25V: .48, .94, 1.8, 7.5, 15;
70.7V: 1, 2, 3.8, 7.5, 15; 100V: 2, 4, 7.7, 15, X
AP Series
transformer-equipped models include a 3-way 25V / 70.7V / 100V
bracket for vertical/horizontal positioning and have
®
APF-15
installs inside a 4" deep opening. The
bracket for vertical/horizontal positioning and have
®
Rated
Sensitivity
Power /
1 M
116 dB
106 dB
500 Hz – 6 kHz±5 dB
114 dB
104 dB
700 Hz – 5.5 kHz
±5 dB
121 dB
108 dB
500 Hz – 4.5 kHz
±5 dB
119 dB
109 dB
400 Hz – 3 kHz±5 dB
120 dB
110 dB
500 Hz – 4 kHz±5 dB
112 dB
101 dB
450 Hz – 12.5 kHz
±5 dB
**** 30 watts Transformer Power Taps: 25V: 0.9, 1.8,
3.7, 7.5, 15; 70.7V: 2, 3.8, 7.5, 15, 30; 100V: 4, 1.7,
15, 30, X
***** AP-30T-25 Transformer Power Taps: 25V: 1.2, 2.5,
5, 7.5, 15, 30
AP-30TC
also available in
mounting fl ange. See
FAMT-6
APF-15T
fi ts inside a 5
Dispersion**
Imped-
Dimensions
ance
70˚
8Ω
Height: 8
⁄
"
3
4
Width: 7
⁄
"
7
8
***
Depth: 9
⁄
"
5
16
95˚
8Ω
7" Diameter x 3
7" Diameter x 5
***
60˚
8Ω
Height: 10"
Width: 10"
****
Depth: 10
⁄
"
1
2
70˚ x 95˚
****
Height: 8
⁄
"
1
4
Width: 14
⁄
"
3
8
Depth: 12
⁄
"
7
8
40˚
****
Height: 10
⁄
"
1
2
Diameter: 9
⁄
"
1
4
175˚
****
Length: 16
⁄
"
1
2
Diameter: 9
⁄
"
3
4
AtlasSound.com
AtlasSound.com
⁄
"
1
2
⁄
" Height
7
16
⁄
" Height
3
16