Atlas CP700 Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz Atlas CP700. Atlas CP700 16 stron. Commercial dual channel power amplifiers
Również dla Atlas CP700: Broszura (2 strony), Instrukcja obsługi (16 strony), Instrukcja obsługi (16 strony), Arkusz specyfikacji (2 strony), Broszura i specyfikacje (10 strony), Instrukcja obsługi (16 strony)

Atlas CP700 Instrukcja obsługi
CP700
CP400 & CP700 COMMERCIAL
POWER AMPLIFIER
Commercial Power Amplifier

INPuT WIRINg

Balanced Inputs
Balanced input wiring requires two conductors with shield (22-gauge is the most common). The use of
crimp type spade lugs is highly recommended for permanent installations. At the input section located on
the rear of the amplifier, wire the "hot"/positive lead to the "+" terminal, the "common"/negative lead to the
"-" terminal and the shield/drain to the "ground" terminal (Figure 3).
The XLR inputs (+4 dB balanced line level) can be utilized with standard 3-pin XLR male to female patch
cables to accommodate outputs from a mixer, equalizer, or crossover when the amplifier is used as a
portable sound system amplifier.
GND
1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. •
©2008 ATLAS SOUND LP
White (+)
Black (-)
Shield
IN
AMPLIFIER INPUTS
CH-2
+
-
GND
THRU
LEVEL
Specifications are subject to change without notice
AtlasSound.com
Printed in U.S.A.
POWER
White (+)
Black (-)
Shield
CH-1
-
+
THRU
LEVEL
STEREO
PARALLEL
BRIDGE
1601 Jack McKay Blvd., Ennis, TX 75119
(800) 876-3333 AtlasSound.com
TELEPHONE: (800) 876-3333 • FAX: (800) 765-3435
OWNER'S MANUAL
IN
Figure 3
ATS002102 RevD 2/08
PP
7