Atlas DSP2210 Instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz Atlas DSP2210. Atlas DSP2210 16 stron. Digital processor and amplifier
Owner's Manual
CAUTION – When Installing the Product
•
Plugging in or unplugging the power cord with wet hands may result in electric shock.
•
Never move the device with the power cord plugged into the wall, as damage to the power cord may result.
•
When unplugging the cord from the wall, grasp the plug, NOT the cord.
•
Never install this device in humid or dusty locations, nor in direct sunlight, near sources of heat, or in areas where sooty smoke or
steam are present. Fire and electric shock may result.
•
Keep all sides of the device at least 3
WARNING – When the Device is in Use
•
To prevent electric shock, do not remove the device cover as there are high voltage components inside. Refer all servicing to Atlas Sound.
•
Should any of the following irregularities occur during use, immediately switch off the power, disconnect the power cord from the
AC outlet and contact Atlas Sound. Do not to attempt to continue operation with the device as this may cause fire or electric shock:
•
Smoke or strange smell coming from the unit.
•
If the device falls or the case is damaged.
•
If water or any metallic objects falls into the device.
•
If the power supply cord is damaged in any way.
•
If the device is malfunctioning.
•
Do not insert or drop metallic objects or flammable materials into the ventilation holes of the device's cover,
as this may result in electric shock or fire.
•
Do not place any containers with liquid or metallic objects on the top of the device.
If any liquid spills into the unit, fire or electric shock may result.
•
Never operate this device or touch the power supply cord during an electrical storm, electric shock may result.
•
Never exceed the wattage on the product when connecting equipment. Fire and/or property damage may result.
•
Operate the device only with the voltage specified on the unit. Fire and/or electric shock may result if a higher
voltage is used.
•
Do not modify, kink, or cut the power cord. Do not place the power cord in close proximity to heaters and do not
place heavy objects on the power cord, including the device itself, doing so may result in fire or electrical shock.
•
Ensure that the safety ground terminal is connected to a proper ground. Never connect the ground to a gas pipe
as a catastrophic disaster may result.
•
Be sure the installation of the product is stable, avoid slanted surfaces as the product may fall and cause injury or property damage.
CAUTION – When the Device is in Use
•
Never place heavy objects on the product, causing it to fall and/or break, resulting in personal injury and
property damage. In addition, the product itself may fall and cause injury and property damage.
•
Contact Atlas Sound for instructions on cleaning the inside of the unit. Large accumulations of dust inside
the unit may result in heat buildup and fire.
•
Ensure that the power supply plug is securely plugged into the wall outlet. Never allow dust to accumulate
on the power plug or inside the wall outlet.
•
When cleaning the unit or the unit is not to be operated for an extended time period, unplug power cord
from the wall.
DSP2210 &
DSP2212
⁄
" away from objects that may obstruct air flow to prevent the unit's internal temperature rise.
1
2
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
– 3 –
Specifications are subject to change without notice.
Digital Processor
and Amplifier
AtlasSound.com