Atlas Copco ETVST101-450-20F Instrukcje dotyczące produktu - Strona 6
Przeglądaj online lub pobierz pdf Instrukcje dotyczące produktu dla Elektronarzędzie Atlas Copco ETVST101-450-20F. Atlas Copco ETVST101-450-20F 20 stron. Electric angle nutrunner
Drukuj stronę
Product information
Country of origin
Please refer to the information on the product label.
Dimensional drawings
For information about the dimensions of a product, see the Dimensional drawings archive:
http://webbox.atlascopco.com/webbox/dimdrw
Overview
The Tensor system
The Tensor system consists of a range of tightening tools powered by brushless electric motors and differ-
ent drive units.
Motors are available in different sizes. All tools are protected from overheating of the motor. Electrical pro-
tection system is based on an earth fault circuit brake, Earth Fault Protector (EFP). The EFP senses small
current leakage (>30mA) and if leakage occurs, the drive is switched off (30ms). Changing, interfering or
tampering with the protection system voids all warranty and obligations from Atlas Copco. Trouble-shoot-
ing and re-start of the system may only be carried out by an authorized person. Check the function of the
EFP on a regular basis by pressing the trip-button. The EFP should switch off accordingly.
Technical data
Ordering No
Model
Model type
Distance center to side
Speed
Length
Torque range
Torque range
Square drive
Weight
Weight
Height
Motor power
Motor voltage
Motor voltage type
Service overview
Service recommendations
Preventive maintenance is recommended at regular intervals. See the detailed information on preventive
maintenance. If the product is not working properly, take it out of service and inspect it.
If no detailed information about preventive maintenance is included, follow these general guidelines:
■
Clean appropriate parts accurately
6
EN
© Atlas Copco Industrial Technique AB - 9836 8445 01
8433208290
ETV ST101-450-20-F
Angle
54 mm
230 r/min
715 mm
110–450 Nm
81–332 ft lb
3/4 in
10.6 kg
23.4 lb
76 mm
1500 W
200 V
3 a.c.
ETVST101-450-20F