Advanced PureAir Newport ULTRA Instrukcja obsługi - Strona 11
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Oczyszczacz powietrza Advanced PureAir Newport ULTRA. Advanced PureAir Newport ULTRA 19 stron.
Drukuj stronę
Cleaning the unit while it is plugged in may rusult in electric shock, electric spark and serious
injury.Unplug the unit before cleaning or maintenance.
Disassembling the Air Purifier
After unplugging, disassemble the unit in sequence of 1 to 5 as shown below. (Put the unit back together in
the reverse 5 to 1 sequence.)
1
Remove the Front Cover
Press the front cover by thumbs and gently
pull forward the front cover.
When assembling
1. Insert into Position A
2. Firmly reconnect the front cover back to its
original position
2
Remove the dust collector cell
2
1
B
1. Push the dust collector cell towards the bottom
of the device
2. Hold the two tabs and pull forward the dust
collector cell
When assembling
1. Insert into position B
2. Firmly reconnect the dust collector cell back to its
original position
CLEANING AND MAINTENANCE
A
3
Remove the Pre-filter
C
Hold the Position C and lift up the pre-flter
When assembling
1. Attach the filter to the connecting locations
on the side
2. Fasten the filter on the front connecting locations.
Remove the HEPA/Activated
4
carbon filter
Hold the strap to help
pulling out the filter.
When assembling
Install the filter with exact
front-and-back direction
as indicated on the sides
of the filter. Do not reverse
the front and back of the
filter.
Remove the Formaldehyde/ TiO
5
Filter
Hold the strap to help
pulling out the filter
When assembling
Install the filter with exact
front-and-back direction as
indicated on the sides of
the filter.
9
2
2