Bose Acoustimass 20 Instrukcja obsługi - Strona 17

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Głośniki Bose Acoustimass 20. Bose Acoustimass 20 22 stron. Powered speaker system
Również dla Bose Acoustimass 20: Instrukcja obsługi (22 strony)

Drukuj stronę

Connecting

the Acoustimass

module

to the Model

5 music

center

Figure

Connecting _e speakers to your

Model 5 music center

Figure

Setting up the remote control

I?--;

Note:

To extend the length of the cables, use the supplied 50-foot extension cable (shown

as the dotted line above). This cable connects between the 30-foot audio input cable and

the music cente_

To connect the Acoustimass 5 or 20 powered speakers to your system, refer to Figure 17 and

follow these steps:

1. Using the supplied 30-foot audio input cable, insert the round DIN connector into the

Acoustimass module.

2. At the other end of that cable, connect the RCA plugs to SPEAKERS B and the 3.5 stereo

mini plug to SYSTEM CONTROL 2 on the music center.

Setting

up the

remote

control

You need to set up a second remote control to operate the SPEAKERS B outputs.

1. Remove the remote control battery cover and locate the miniature switches (Figure 18).

2. Make sure that the house code settings (switches 1, 2, 3, 4) match those on your first

remote.

3. Set switches 5 down and 6 up for SPEAKERS B.

Connecting

power

to your

system

CA UTION' If you purchased a dual-voltage system, it is important that you set the speakers

to the correct voltage. To de this, refer to "Selecting the correct voltage" on page 6.

Follow these steps to connect power to your Acoustimass powered speaker system:

1. Plug the power cord from the Acoustimass module into an AC power (mains) outlet.

2. Insert the power cord of the LifestyW' system into an AC power (mains) outlet.

3. Turn the Acoustimass module power switch to the On position.

AM262838

00 !Zpdf

December 20, 2001