Bose BoseBuild SPEAKER CUBE Podręcznik - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik dla Głośniki Bose BoseBuild SPEAKER CUBE. Bose BoseBuild SPEAKER CUBE 4 stron.
Również dla Bose BoseBuild SPEAKER CUBE: Zacznij tutaj (2 strony)

Drukuj stronę

Using your speaker cube with multiple devices

Your BOSEbuild speaker cube can remember up to eight paired devices and can be actively

connected to two devices at a time. If you pair a ninth device, the least recently used device will

be deleted from the speaker' s memory.

Pairing another device

1. With the speaker cube powered on, press and hold the Bluetooth button ( )until the

Bluetooth indicator light blinks blue and the voice prompt says, "Ready to pair another

device."

2. On your mobile device, make sure Bluetooth is on. (The Bluetooth menu is usually found in

the Settings menu.)

3. Select your BOSEbuild Speaker Cube from your mobile device' s Bluetooth list.

The Bluetooth indicator glows solid white, and the voice prompt says, "Connected to

<device name>."

Managing multiple connections

When powered on, the speaker will automatically try to connect to the two most recently

connected devices.

When two devices are actively connected, you can play music from either device. To switch

between connected devices, pause the ﬁrst device and play music from the second.

Scrolling through other paired devices

To play music from a paired device that is not currently connected:

1. Press the Bluetooth button ( ) to hear which device(s) are currently connected.

2. Press the Bluetooth button again within three seconds to connect to the next paired device.

3. Repeat step 2 until you hear the correct device name.

Note: To use this feature, voice prompts must be on.

Clearing the speaker memory

To clear the speaker' s memory of all paired devices:

1. Press and hold the Bluetooth button ( ) for ten seconds, until you hear "Bluetooth device

list cleared."

2. Delete the BOSEbuild Speaker Cube from your mobile device' s Bluetooth list.

All Bluetooth devices are cleared and the speaker is ready to pair.