Airtecnics Kleenbox Instrukcja instalacji, obsługi i konserwacji - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja instalacji, obsługi i konserwacji dla Oczyszczacz powietrza Airtecnics Kleenbox. Airtecnics Kleenbox 16 stron. Hepa filtration box
Drukuj stronęHORIZONTAL
Four fixing points placed on the four corners:
The moorings should be dimensioned according to
the weight of each model (see technical data
section). The installation can be done by threated
rods, tensioners or other supports not included.
Attention! Heavy product.
Do not stand under the suspended equipment during transport or assembly.
Store in a dry place protected from the elements. If the packaging is open, cover the purifier to protect it from
dust. Do not step on or place heavy load son it to avoid damage to he material. Storage temperatura
between -20ºC and +40ºC.
When transporting the material, make sure that it is not damaged by the forklift (penetration of the fork in the
packaging). The instructions on the packaging must be observed.
•
ON/OFF: Includes a switch which cuts the fan power supply and immediately stops the equipment.
•
Control 0-100%: Includes a 0-10V potentiometer which allows to regulate fan speed from 0 to 100%.
•
Dirty filter visual alarm: by using a led indicator, the equipment informs the user that filters are dirty
and need to be replaced to keep the air clean.
The following diagrams are attached:
•
Kleenbox horizontal and vertical. Diagram WELDOE07005
Fixings
Four wheels to make easier the mobility. Two of
them includes breaks which allow the fix the
equipment and avoid the undesired displacements.
TRANSPORT AND STORAGE
OPERATION INSTRUCTIONS
Control board features
WIRING DIAGRAMS
4
VERTICAL