Atlas Copco PB 14 C Skrócona instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Narzędzia Atlas Copco PB 14 C. Atlas Copco PB 14 C 11 stron.
Drukuj stronę
Assembly
Pressing the
1
Replace the original screws (3) to the
outer ring of the
armature–facing side of the bearing
taper roller
housing (2).
bearing into the
2
Place the housing onto a press and press
bearing housing
in the outer ring (1).
1
Assembling and
Fit the fan (6), the bearing clamp plate (5),
replacing the
the front ball bearing (3), and the
armature
O–ring (2) to the armature (7), and press it
assembly
in with a service tool.
2
Fit the complete armature into the bearing
housing (1). If necessary, tap the housing
lightly with a hammer.
3
Fit the bearing clamp plate (5) to the
bearing housing and secure with the four
screws (4).
1
Assembling the
Before assembly make sure that the field
field case
location rubbers (6) fit properly in the field
case (8).
2
Insert the field coil (4) into the field
case (8).
3
Fit the baffle (3) to the field case.
4
Replace the baffle gasket (2) on the field
case. Ensure proper fit!
5
Place the field case over the armature and
fit it to the bearing housing (1).
6
Secure the field case with the bearing
housing with the four screws (7).
Fitting the motor
1
Fit the motor housing (2) to the bearing
housing
housing (1).
2
Replace the six Allen screws (4) together
with the inserts (3) and tighten them.
Repair instruction No. 171.5/94
PB 14 D, PB 14 C
1
1
2
1
2
3
1
2
3
3
4
5
6
7
8
4
5
6 7
8
2
3
4
PAGE
7