Bose PANARAY MB4 Instrukcja serwisowa - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla System głośników Bose PANARAY MB4. Bose PANARAY MB4 11 stron. Modular bass loudspeaker
Również dla Bose PANARAY MB4: Podręcznik użytkownika (2 strony), Instrukcja instalacji (16 strony)

Drukuj stronę

Note: Refer to the figure below for the

following procedures.

1. Terminal Panel Removal

1.1 Using a Phillips-head screwdriver,

remove the four screws (11) that secure the

terminal panel (8) to the loudspeaker cabi-

net.

1.2 Gently pull the terminal panel away from

the cabinet. Be careful not to mark the

surface of the terminal panel or the cabinet.

1.3 Unplug the wiring harness from the PCB.

2. Grille Assembly Removal

2.1 Using an M4 torx-head screwdriver,

remove the four screws (6) that secure the

grille assembly (5) to the plastic end caps.

2.2 Gently pull the grille assembly (5) off of

the cabinet.

Disassembly Procedures

3. Woofer Assembly Removal

4. Logo Removal

3.1 Perform procedure 2.

3.2 Using a Phillips-head screwdriver,

remove the four screws (14) that secure

the woofer assembly (13) that you wish to

remove to the loudspeaker cabinet.

3.3 Lift the woofer assembly out of the

cabinet and unplug the wires from the

woofer terminals.

Note: Be sure to replace the woofer gasket

(12) when you replace the woofer assembly.

4.1 Perform procedure 2.

4.2 Clip off the lock washer (1) from the logo

assembly. Hold the spring (2) while clipping

the lock washer as the spring may fly off.

4.3 Pull the logo (15), cup washer (3),

spring and lock washer away from the grille.