Bose 3-2-1 Instrukcja obsługi - Strona 15

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System kina domowego Bose 3-2-1. Bose 3-2-1 44 stron. Home entertainment system
Również dla Bose 3-2-1: Podręcznik szybkiej konfiguracji (1 strony), Instrukcja rozwiązywania problemów (28 strony)

Figure 13

Typical arrangement of

components connecting to

the media center

Connecting other sources

You can connect both the audio and video outputs of a VCR or other video source to the

media center. A video connection will pass signals through to the TV.

A typical arrangement of components is shown in Figures 13 through 15. For additional

examples of how these connections can be made, refer to "Other choices" on page 19.

You can connect the audio output of up to three components, including your TV, directly to

the media center using the Video 1, Video 2, and Aux input jacks on the rear panel.

Each input includes jacks for Left and Right analog audio and a coaxial jack for digital audio.

In addition, the Video 1 input provides an optical jack for digital audio.

The jacks marked VIDEO 1 and VIDEO 2 are set automatically for movie EQ. If you connect a

video source to AUX, you can still set sound for movie EQ in the Settings on-screen menu.

When connecting a component's audio to the media center jacks, remember to:

• use standard RCA audio cables

• match the red connector to the right channel (R) and the white (or black) connector to the

left channel (L)

• use a Y-adapter (available at electronics stores) to connect to a mono source

For further details on making the video connections between your VCR and TV, refer to the

manuals for those video components.

When all the components are connected to the media center, you can add the antennas and

then plug in the system.

AM256950_02_V.pdf • January 29, 2002

video

audio

video

System Setup

Input from cable

audio & video

Cable/sat

audio & video

VCR