Bose LIFESTYLE T10 Instrukcja obsługi - Strona 27

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System kina domowego Bose LIFESTYLE T10. Bose LIFESTYLE T10 32 stron. Home entertainment systems
Również dla Bose LIFESTYLE T10: Instrukcja konfiguracji (18 strony), Instrukcja obsługi (13 strony), Instrukcja obsługi (34 strony), Instrukcja obsługi (34 strony), Instrukcja konfiguracji (35 strony), Podręcznik (32 strony), Instrukcja obsługi (4 strony), Podręcznik (34 strony), (Angielski) Podręcznik użytkownika (32 strony)

Drukuj stronę
Bose LIFESTYLE T10 Instrukcja obsługi
CARE AND MAINTENANCE
The system is not responding
to initial operation
of my
Bose c°remote
The Bose remote does not
control a device
I added
during the initial setup
One video connection
is less
than optimum
System
doesn't
do
anything
No sound
• Make sure the control
console
is turned
on.
• Make sure batteries
are in the remote.
• Reset the system. See "Resetting
the system"
on page 24.
• Press any remote key and watch
the power light on the control
console.
It should
blink with each press.
If not, see "Pairing
the remote with the console"
on page 24 and follow the procedure.
• Try setting
up the device again. Press the Setup button on the control console.
Select the device
options
and follow the on-screen
instructions
to set up the device again.
• Your system
may need a software
update.
See "Performing
a system
software
update"
on page 24.
° To change a video connection,
press the Setup button on the control
console
and select the device setup
options.
Follow the on-screen
instructions.
° Make sure the AC power cord is inserted
securely
into the power supply.
° Make sure the Acoustimass
_' module and the power supply
are fully plugged
into a live AC (mains) outlet.
° Select a connected
device from the SOURCE
menu.
° Reset the system. See "Resetting
the system"
on page 24.
° Make sure the Acoustimass
module
is plugged
into a live AC (mains) outlet.
° Increase the volume.
° Press the Mute button
(i_) and make sure your system
is not muted.
° Check the input connections
on the control
console.
Make sure that you have selected
the right source.
° Make sure that the audio input cable is firmly plugged
into the Acoustimass
connector
on the control
console
and the other end is firmly seated into the Media Center connector
on the Acoustimass
module.
° Check connections
between
the front and rear speakers
and the Acoustimass
module.
° For radio operation
(V25 and V35 systems
only), connect
the FM and AM antennas.
° Reset the system. See "Resetting
the system"
on page 24.
21