Bose VideoWave III Instrukcja obsługi - Strona 30
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla System kina domowego Bose VideoWave III. Bose VideoWave III 38 stron. Bose soundtouch wireless adapter owner's guide
Również dla Bose VideoWave III: Instrukcja konfiguracji (20 strony), Instrukcja obsługi (14 strony)
Drukuj stronę
Changing Your System Setup
Installing the IR emitter
In order to control external sources like a set-top box or DVD
player, the control console is designed to transmit infrared (IR)
signals to them. In some cases, the sources may not reliably
receive these signals, resulting in inconsistent control. If this
occurs, please install the included IR emitter cable for one, two,
or three sources according to the following instructions.
1.
Insert the plug on the IR emitter cable into the IR connector
on the control console.
2.
Place each emitter head so the flat side is against the front
panel of each source.
3.
Using the supplied adhesive pad, attach the emitter head to
the source.
Note: You may need to change the position of each IR emitter
head to obtain reliable control of connected sources.
30 - English
External
source
External
IR emitter
source
heads
IR
IR emitter
cable