Bose Companion 3 Series II Instrukcja obsługi - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz Bose Companion 3 Series II. Bose Companion 3 Series II 40 stron. Multimedia speaker system
Również dla Bose Companion 3 Series II: Instrukcja obsługi (40 strony), Instrukcja obsługi (22 strony), Instrukcja obsługi (10 strony), Instrukcja obsługi (20 strony), Instrukcja obsługi (26 strony), Podręcznik szybkiej konfiguracji (2 strony), Podręcznik szybkiej konfiguracji (2 strony), Szczegółowa instrukcja montażu (2 strony), Instrukcja instalacji (20 strony), Specyfikacje (6 strony), Broszura i specyfikacje (4 strony), Instrukcja obsługi (19 strony), Instrukcja serwisowa (36 strony), Instrukcja serwisowa (16 strony)

Bose Companion 3 Series II Instrukcja obsługi
U
SING YOUR SPEAKER SYSTEM

Troubleshooting

12

Balancing tone for the sound you like

The acoustics of your room affects the sound you hear there. Upholstered furniture, carpets,
and drapes absorb sound, which can muffle the treble (high frequencies). Bare floors, walls,
and furniture have the opposite effect and can make the treble sound shrill.
A bass compensation control on the Acoustimass
you hear.
There are two ways to adjust the bass:
• Turn the control clockwise to increase or counterclockwise to decrease bass.
• Reposition the module. To increase bass, turn the front of the module toward a wall or other
nearby surface. To decrease bass, aim the front from the wall.
Problem
The speaker system does not
play
The speaker system sound!
seems distorted
One speaker does not perform
or sounds distorted
!"#$%&'()*%)+#,-*./01&2 2 34!5
Français
®
module enables you to balance the tones
What to do
• Make sure all connections are secure. (See "Making
connections" on page 8.)
• Check your speaker wires for damage or frays, which
can cause an open or short circuit.
• Be sure that the sound source is plugged in and !
playing at an audible volume.
• Make sure the power is on and the system is not
muted. The LED on the control pod should be green
when unmuted.
• If using a PC, check your sound card settings to make
sure the "Digital output only" setting is turned OFF.
This setting is typically found in the Options menu of
the volume control icon. This icon is usually located in
the lower right-hand corner of the Windows desktop.
• Decrease the volume of the sound source and
increase the speaker system volume using the control
pod.
• Check connections from the speakers, control pod,
and computer to the Acoustimass
"Making connections" on page 8.)
• Be sure the cable from the unheard speaker is firmly
inserted in the proper To Speaker jack on the module.
• Switch the connection of both speakers to jacks on
the rear of the Acoustimass module.
If this does not resolve the problem for the !
-
originally unheard speaker, this speaker may be
the cause. Contact Bose
- If the problem switches to the other speaker (the
one that previously performed) a defective output
channel on the sound source may be the cause.
Try a different source.
- If this does not resolve the problem, the Acousti-
mass module may be the cause. Contact Bose
Customer Service.
• Check balance levels on your sound source.
Español
English
®
module. (See
®
Customer Service.