Bose Companion 3 Series II Instrukcja obsługi - Strona 13

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz Bose Companion 3 Series II. Bose Companion 3 Series II 40 stron. Multimedia speaker system
Również dla Bose Companion 3 Series II: Instrukcja obsługi (40 strony), Instrukcja obsługi (22 strony), Instrukcja obsługi (10 strony), Instrukcja obsługi (20 strony), Instrukcja obsługi (26 strony), Podręcznik szybkiej konfiguracji (2 strony), Podręcznik szybkiej konfiguracji (2 strony), Szczegółowa instrukcja montażu (2 strony), Instrukcja instalacji (20 strony), Specyfikacje (6 strony), Broszura i specyfikacje (4 strony), Instrukcja obsługi (19 strony), Instrukcja serwisowa (36 strony), Instrukcja serwisowa (16 strony)

Operating the Companion

Figure 7

Control pod features

3 multimedia speaker system

Turning your speaker system on and off

1. Turn on your computer or sound source.

2. Turn the power switch on the back of the Acoustimass

Note: To conserve energy, your system can be put into standby mode. The mute or standby

mode is activated by touching the center portion of the control pod and indicated by the yellow

light.

Adjusting the sound

The acoustics of your listening room affect the sound quality of any speaker system.

Upholstered furniture, wall-to-wall carpets, or heavy drapes can muffle the treble (high

frequencies). Bare floors and walls and unupholstered furniture reflect the treble and may

cause it to sound too shrill.

Bass

After listening to your speaker system, you may wish to adjust the sound. Use the bass

compensation control on the Acoustimass module. Turn the control clockwise to increase, or

counterclockwise to decrease bass. You may also adjust the placement of the module to

affect bass; simply aim the port of the module away from the wall to decrease bass, or toward

the wall to increase bass.

Volume

Use the volume control on the control pod. Rotate the outer ring clockwise to increase, or

counterclockwise to decrease the volume (Figure 7).

To mute the system, gently tap the silver touch-sensitive panel on the control pod. Tap again

to unmute. The indicator light turns yellow when the system is muted, and green when it is

active.

Volume control

Headphone jack

Note: Using the volume controls in their maximum position may reduce the speaker system's

maximum volume, by causing the internal protection circuity to engage.

If you wish to control volume at the sound source instead of from the control pod, set the

volume control on the control pod near maximum volume; then make all other adjustments

using the volume control on your sound source. For instance, you may be able to control the

volume on your computer from its control panel.

Standby/Active indicator

Touch-sensitive mute/unmute switch

Operation

module to ON (I).

Sound source input