Bose FreeSpace 32 Podręcznik instalatora - Strona 7
Przeglądaj online lub pobierz pdf Podręcznik instalatora dla Wzmacniacz Bose FreeSpace 32. Bose FreeSpace 32 23 stron.
Również dla Bose FreeSpace 32: Podręcznik instalatora (17 strony)
Drukuj stronę
3.0 Before You Begin
For 625 mm tiles, extend the rails in opposite directions until each rail reaches the
ceiling grid on one side of the mounting pan.
Ceiling tiles made of particle board, plywood, gypsum board, or plaster usually do
Figure 2
10 – 15
not require support rails. However the support rails may be needed if moisture or
other environmental conditions may weaken the ceiling.
Structural ceilings – The support rails and spacers must be removed from the
ceiling pans before using the structural ceiling installation method.
Rotation feature
FreeSpace
®
Model 8 and Model 32 loudspeakers can be rotated on their springs
to conveniently access the terminals after installation. The ceiling pan and springs
hold the speaker in place while the tap settings are changed or electrical connec-
tions are completed (see Figures 21 and 22 on page 15). Be careful not to damage
the mounting hole when turning or releasing the loudspeaker.
Do not use the rotation feature if the loudspeakers are installed in a very thick
ceiling. In general, the rotation feature works with FreeSpace Model 8 loudspeak-
ers installed in ceilings up to 2" thick, and with FreeSpace Model 32 loudspeakers
installed in ceilings up to 1" thick. To be certain, install one loudspeaker and
attempt rotation as described in Section 4.3, "Electrical connections."
3.2
Clearance
Allow enough clearance for both the depth of the loudspeaker and the wire from
the electrical fitting. To decrease this distance, use an angled electrical fitting with
flexible metallic conduit or flexible metallic tubing.
7
AM177915_03_V.pdf • May 6, 2002