Bose FreeSpace 8 Podręcznik instalatora - Strona 13

Przeglądaj online lub pobierz pdf Podręcznik instalatora dla Wzmacniacz Bose FreeSpace 8. Bose FreeSpace 8 23 stron.
Również dla Bose FreeSpace 8: Podręcznik instalatora (17 strony)

Drukuj stronę

4.2 Loudspeaker enclosures

Note: If the electrical connections

have not been made yet, pull all

wires through the mounting hole

and clear of the springs.

Complete electrical connections before releas-

ing the loudspeaker into the ceiling. Releasing

the loudspeaker with wires unconnected could

cause the loudspeaker to jam on the dangling

wires and could damage the mounting hole or

the loudspeaker rim.

If using the mounting springs to support the

loudspeaker while making electrical connec-

tions, only complete Step 1 now. Once the

loudspeaker is hooked on the springs, continue

with Section 4.3 "Electrical connections." Then

return to Step 2 of this section.

If electrical connections have been completed,

install the loudspeaker as follows:

1. Push the loudspeaker past the springs and

wires into the hole in the ceiling tile.

Hook the springs to the sides of the

loudspeaker (Figure 15).

2. Pull down on the loudspeaker until you feel

the springs release (Figure 16).

3a. If making electrical connections now, rotate

the loudspeaker to the wiring position. See

Section 4.3, "Electrical connections."

3b. If the electrical connections have been

completed, gently release the loudspeaker

(Figure 17).

Go to Section 4.4, "Loudspeaker grilles."

Figure 13

AM177915_03_V.pdf • May 6, 2002

4.0 Installation

C L I C K

Figure 14

Figure 15

Figure 16

Figure 17