Bose L1 Model II Instrukcja obsługi - Strona 19

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz Bose L1 Model II. Bose L1 Model II 32 stron. Portable line array systems
Również dla Bose L1 Model II: Instrukcja obsługi (32 strony), Instrukcja obsługi (28 strony), Arkusz danych technicznych (8 strony), Arkusz danych technicznych (8 strony), Podręcznik aplikacji (13 strony), Podręcznik (15 strony)

Figure 7

Installation of two B1 bass

modules

Connecting two B1 bass modules

Connect the first B1 bass module to the L1 model I power stand as shown in "Connecting

one B1 bass module."

Insert one end of the second B1 bass module cable into the unused jack on the rear panel of

the first B1 bass module. Insert the other end of the cable into one of the jacks on the rear

panel of the second B1 bass module.

CAUTION: Do not connect more than two B1 bass modules to the B1 Bass Module jack on the

L1 model I power stand. Driving more than two B1 bass modules from the B1 Bass Module out-

put will improperly load the amplifier in the L1 model I power stand resulting in poor system per-

formance.

Note: Use only the supplied (blue) B1 bass module 4-wire cable to connect B1 bass modules

to the L1 model I power stand. The L1 model I power stand uses the signals on two of the four

wires to automatically sense how many B1 bass modules are connected to it. DO NOT SUB-

STITUTE the supplied cable with a 2-wire speaker cable.

B1 Bass Module

ETUP