Bose Lifestyle 28 Instrukcja rozwiązywania problemów - Strona 30
Przeglądaj online lub pobierz pdf Instrukcja rozwiązywania problemów dla Wzmacniacz Bose Lifestyle 28. Bose Lifestyle 28 32 stron. Dvd home entertainment systems
Również dla Bose Lifestyle 28: Instrukcja instalacji (32 strony), Instrukcja obsługi (44 strony), Instrukcja obsługi (22 strony), Instrukcja obsługi (46 strony), Instrukcja obsługi (44 strony), Instrukcja obsługi (34 strony)
- 1. Table of Contents
- 2. Safety Information
- 3. Electrostatic Discharge Senstitive (ESDS) Device Handling
- 4. Specifications
- 5. Theory of Operation
- 6. Theory of Operation
- 7. Setting up a Computer to Issue TAP Commands
- 8. Placing the Bass Module into TAP Mode
- 9. Equalizer Programming Method
- 10. Scope Photos
- 11. Scope Photos
- 12. Integrated Circuit Diagrams
- 13. Troubleshooting Guide
Integrated Circuit Diagrams
DSP ADSP21065LKS, part number 254191-001
Pin
Type
SDCLK 1-0
I/O/S/T
SDRAM 2x Clock Output. In systems with multiple SDRAM devices connected in
parallel, supports the corresponding increase clock load requirements, eliminating
need of off-chip clock buffers. Either SDCLK 1 , or both SDCLKx pins can be tri-
stated.
_____
I/O/T
SDRAM Write Enable. in conjunction with CAS MSx, RAS, SDCLKx and
SWDE
sometimes SDA10, defines the operation for the SDRAM to perform.
DQM
O/T
SDRAM Data Mask. In write mode DQM has a latency of zero and is used to block
write operations.
SDCKE
I/O/T
SDRAM Clock Enable. Enables and disables the CLK signal.
SDA10
O/T
SDRAM A10 Pin. Enables applications to refresh an SDRAM in parallel with a
host access.
XTAL
O
Crystal Oscillator Terminal. Used in conjunction with CLKIN to enable the ADSP-
21065L's internal clock generator or to disable it to use an external clock source.
See CLKIN
________
I/O/A
PWM Output Event Capture. In PWMOUT mode, is an output pin and functions
PWM_EV
as a timer counter. In WIDTH_CNT mode, is an input pin and function as a pulse
ENT 1-0
counter.event capture.
VDD
P
Power Supply; Nominally +3.3Vdc (33pins)
GND
G
Power Supply Return. (30 Pins)
NC
Not Connect. Reserved pins which must be left open and unconnected
PS18/28/35 Troubleshooting Guide
Function
30