AirTek MOB-10KDCR Instrukcja obsługi i użytkowania - Strona 13
Przeglądaj online lub pobierz pdf Instrukcja obsługi i użytkowania dla Klimatyzator AirTek MOB-10KDCR. AirTek MOB-10KDCR 20 stron. Mobile air conditioner
Drukuj stronę
on or changing modes.
For the unit with heat function this product is also equipped with a de-frost function.
When using the heating function at low ambient temperature, the heating might be
interrupted briefly to melt the frost. If this happens, just wait for the heating mode to
pick up again. As the appliance has to heat up, the fan will stop for 15-20 seconds
when you switch to the heating mode.
Remote control
SETTING UP
1. Remove the cover from the back of the remote control.
2. Insert two AAA batteries (batteries not included).
3. Insert the power plug of the unit into an outlet.
4. Always point the remote control towards the unit when you want to use it.
5. Make sure that there is nothing obstructing the signal path.
6. The maximum distance between remote control and appliance is 4 meters.
7. Remove the batteries if the remote control is not going to be used for some time.
A change in the function is usually indicated by a beep.
Note:
• Do not abuse the remote control.
• Do not expose the remote control to direct sunlight or leave it next to a radiator or
other source of heat.
• Do not use rechargeable batteries as they differ from standard dry cell batteries in
shape, size and performance.
• Be sure to replace the batteries with two new batteries of the same type.
Remote control functions
13