DROMEAS Alma HC Instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wyposażenie wnętrz DROMEAS Alma HC. DROMEAS Alma HC 12 stron. Working desk
Również dla DROMEAS Alma HC: Instrukcja obsługi (17 strony)
Drukuj stronę1. Introduction
The ALMA desk range has been enriched with design solutions and proposals that respond to
the current needs of flexibility and ergonomics in the modern work environment.
The ability to adjust the height of the working surface ensures maximum fitting of the furniture
to the user. It creates a functional and flexible workspace, while maintaining its unified
aesthetics. The lifting mechanism (motors) is mounted on two vertical supports (lifting units) on
the working desks. The height adjustment of the desk is achieved by selecting the
corresponding keys on the handset. The adjustment range is 640-1290 mm, the maximum
lifting speed is estimated at 35 mm / sec and the lifting capacity is limited to 125 kg.
The following instructions give you a detailed description of the product with reference to the
packaging and the various parts, technical specifications and materials used, as well as its
ergonomic and environmental aspects. Furthermore we provide all the necessary instructions
for the life cycle of the product: from assembly and use to the end of the life cycle. Finally, you
can find a glossary of relevant concepts as well as the assembly plans attached.
Information: Dromeas assumes no liability or warranty for damages and malfunctions
resulting from noncompliance with the operating instructions.
2.
Product description
2.1 Packaging and parts (see Attachement)
All available accessories are listed in the technical description of the product that is published
on the website
https://www.dromeas.com
A wide range of accessories in various materials, surfaces and colors is available for our
products. For detailed information about available system components and additional orders
and subsequent deliveries, please contact Customer Support
visit the online store
https://eshop.dromeas.gr
2.2 Used materials
2.2.1 Packaging
The working desk is packed in a polystyrene carton. For desktop protection, edge and corner
protectors made of PE are used.
2.2.2 Working desk
- Steel sheet ST 37 DCP (cold rolled)
- Chipboard P2 of category E1 and ABS 2 mm perimeter edge banding
- Other plastic parts from PP
- 18 mm multiplex sheet with two-sided HPL coating.
https://www.dromeas.com
or