DROMEAS Alma HC Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wyposażenie wnętrz DROMEAS Alma HC. DROMEAS Alma HC 12 stron. Working desk
Również dla DROMEAS Alma HC: Instrukcja obsługi (17 strony)

Drukuj stronę

3.5.3

Adjusting the upper and lower desk height limits (for memory handset -

optional equipment)

If window curtains or other objects prevent the table's surface from moving, both the upper

and lower height limits can be defined as follows:

a. Setting the Upper-Limit position:

1. Use the UP/DOWN buttons to move the desk surface to the desired maximum-

height position.

Press the "M" for one time and release, then press the "UP" button for

2. one time and release. The LED display will show "5". then press and hold the "M"

button (about 2 seconds) until the LED display changes to "999". The display will

automatically return to the selected height. The new upper limit is now set.

b. Setting the Lower-Limit position:

2. Use the UP/DOWN buttons to move the desk surface to the desired minimum-

height position.

3. Press the "M" button for one time and release, then press the "DOWN" button for

one time and release. The LED display will show "5". Then press and hold the "M"

button (about 2 seconds) until the LED display changes to "000". The display will

automatically return to the selected height. The new lower limit is now set.

3.5.4

Deletion of upper and lower desk height limits (for memory handset-optional

equipment)

Press and hold the "M" button until the LED display flashes "5 -" and then release it.

Within 5 seconds, press the "M" button again and hold for 2 seconds. The LED display

will change to "555" and then automatically return to the height display. The upper and

lower limits are now removed.

3.5.5 Reset procedure

If the actual height of the desk surface is no longer in line with the height displayed on

the screen or when the control unit is replaced with another, the Reset procedure must

be started in the following sequence:

1. Press and hold the "DOWN" button on the handset until the desk reach the lowest

height

2. Then release the "DOWN" button

3. Press and hold the "DOWN" button until "RST" appear on the LED screen

Release the "DOWN" button

5. Now, press the "DOWN" button until the desk surface has gone down a bit, then

slightly lift and finally stop

6. Release the "DOWN" button. The desk is ready for use!