Drone Sky Hook DSH-LSL1-P4 Instrukcja instalacji i obsługi - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Akcesoria do dronów i quadkopterów Drone Sky Hook DSH-LSL1-P4. Drone Sky Hook DSH-LSL1-P4 12 stron. Led searchlight with built-in laser pointer for dji phantom 4/3

Drukuj stronę

www.droneskyhook.com

Operation

Drone-Sky-Hook Release & Drop Device (PLUS models only) – Control Modes of the

AUX Channel to Turn the SearchLight On or Off

DSH Models: Single Release & Drop PLUS / Dual Release & Drop PLUS

Operation Mode 1 – Drone Rotation

Remote Controller (Mode 2)

LEFT STICK

Operation Mode 2 – Drone Remote Controller C1/C2 Button and/or DJI App

Note: Use the DJI App to assign C1 or C2 button to Turn On/Off front LEDs

Remote Controller

C1 / C2 Button

DJI App

Settings – Main Controller Settings – Advanced

Settings

Operation Mode 3 – Manual – FUNC button on DSH unit

DSH Release & Drop unit

IMPORTANT NOTE: At the end of each operation wait 3 seconds for the execution your command and before the initiation of the next command (False

Command Avoidance Algorithm (FCAA)).

Quickly Rotate (YAW) the drone two complete turns clockwise to command the AUX Channel to turn ON.

Quickly Rotate (YAW) the drone again two complete turns clockwise to command the AUX Channel to

turn OFF.

Press C1 or C2 three times in quick succession (while maintaining about 0.5-1 second

between each press) to command the AUX Channel to turn ON.

Press C1 or C2 three times again in quick (while maintaining about 0.5-1 second between

each press) to command the AUX Channel to turn OFF.

In the App menu switch the drone's front LEDs ON, then OFF and then back ON or OFF, then

ON and then OFF.

(Total of one ON-OFF-ON or OFF-ON-OFF cycle) to simulate the operation of the C1 or C2

buttons on the drone's remote controller (see above).

Maintain about 0.5-1 second idle duration between each switch operation.

Press three times the device's FUNC button to simulate the operation of the C1 or C2 buttons

on the drone's remote controller (see above).

Maintain about 0.5-1 second idle duration between each operation of the FUNC button.

Page 12 of 12

Operation