Drone Sky Hook DSH-SRDP1-P4 Instrukcja obsługi - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria do dronów i quadkopterów Drone Sky Hook DSH-SRDP1-P4. Drone Sky Hook DSH-SRDP1-P4 7 stron. Single/dual release & drop for phantom 4 / phantom 3 series drones, single/dual release & drop plus for phantom 4 / phantom 3 series drones

Drukuj stronę

Operation Mode 2 – Drone Remote Controller C1/C2 Button and/or DJI App

Note: Use the DJI App to assign C1 or C2 button to Turn On/Off front LEDs

Remote Controller

C1 / C2 Button

DJI App

Settings – Main Controller Settings –

Advanced Settings

Operation Mode 3 – Manual – FUNC button on DSH unit

DSH Release & Drop unit

IMPORTANT NOTE: At the end of each operation wait 3 seconds for the execution your

command and before the initiation of the next command (False Command Avoidance Algorithm

(FCAA)).

Press C1 or C2 three times in quick succession (while

maintaining about 0.5-1 second between each press) to

command the AUX Channel to turn ON.

Press C1 or C2 three times again in quick (while

maintaining about 0.5-1 second between each press) to

command the AUX Channel to turn OFF.

In the App menu switch the drone's front LEDs ON, then

OFF and then back ON or OFF, then ON and then OFF.

(Total of one ON-OFF-ON or OFF-ON-OFF cycle) to

simulate the operation of the C1 or C2 buttons on the

drone's remote controller (see above).

Maintain about 0.5-1 second idle duration between each

switch operation.

Press three times the device's FUNC button to simulate

the operation of the C1 or C2 buttons on the drone's

remote controller (see above).

Maintain about 0.5-1 second idle duration between each

operation of the FUNC button.

Operation