DroneTech SPLASH DRONE 3+ Instrukcja kalibracji

Przeglądaj online lub pobierz pdf Instrukcja kalibracji dla Drony DroneTech SPLASH DRONE 3+. DroneTech SPLASH DRONE 3+ 2 stron.

Controller Power ON First – Then Drone Second – ALWAYS

Drone Power OFF First – Then Controller Second – ALWAYS

1. ACCELEROMETER CALIBRATION – All Switches UP!

 Power on Controller, Then Drone (Hear Beep Tone)

 GREEN /

RRedD

 Then change to fast flashing GREEN / Red

 Turn "Return Home" Switch down

 *Left Stick to Lower Right, Right Stick to Upper Right (AND HOLD)

 Drone in calibration mode

 Should go fast flashing GREEN / Yellow / Red, Then slow flashing GREEN

 Release sticks

 First Calibration complete

 Power off Drone, then Controller.

2. COMPASS CALIBRATION.

 Ensure all SWITCHES UP

 Power on Controller, Then Drone (Hear Beep Tone)

 Turn "Return Home" Switch down

 Left Stick to Lower Left, Right Stick to upper Left

 Should be RED, GREEN and YELLOW flash rapidly

SPLASH DRONE 3+

/YELLOW lights should be fast flashing for about 10seconds.

www.dronetech.co.nz

@nzdronetech

09 836 6088

@dronetechnz