Elegoo MARS 3 Podręcznik - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik dla Drukarki 3D Elegoo MARS 3. Elegoo MARS 3 18 stron.

Notice:

If you need technical support please contact us at [email protected].

Please keep the Mars 3 3D printer and its accessories out of the reach of children.

When you use the printer for the ﬁrst time, you would need to adjust it before printing

(Unbox and Test).

If the printing failed, you would have to clean the resin tank and change resin, otherwise

it may cause damage to your printer.

The capacity of the resin in the tank must not exceed the MAX line position.

Please use 95% degree (or higher) ethyl alcohol or isopropyl alcohol to wash your model

unless you are using water washable resin.

Please use the printer indoors and avoid direct sunlight and dusty environment.

Please keep your printer away from water or damp environment.

Please wear a mask and gloves before using and avoid direct skin contact.

If you want to print models with sharp edges please be careful when removing it from the

build platform.