Elegoo MARS 3 Podręcznik - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik dla Drukarki 3D Elegoo MARS 3. Elegoo MARS 3 18 stron.

7.Press "10mm" -then press "up"

for 10 times, then Z axis will go up

about

100mm.(See picture 6)

8.Test the lights by pressing "Tool" -" Exposure" -" Next"

a complete "ELEGOO TECHNOLOGY www.elegoo.com" then the UV lights work perfectly.

（Picture 6）

Put the resin tank back and fasten the screws

(See picture

7). If the 4K screen can display

（Picture 7）