Elegoo MARS 4 Series Podręcznik użytkownika - Strona 7
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Drukarki 3D Elegoo MARS 4 Series. Elegoo MARS 4 Series 20 stron.
Również dla Elegoo MARS 4 Series: Podręcznik użytkownika (20 strony)
Drukuj stronę
Leveling
1. Take out the printer carefully and tear off the plastic film.
2. Power on the printer.
3. Please insert the build platform, fasten the screw knob and loosen the fixing screws.
(See Picture 1)
4. Remove the resin tank, place a leveling paper between the build platform and the
tempered glass, and click "Move Z axis to zero"
stops, please press the top of the build platform with one hand, and ensure that the four
corners of the build platform are evenly attached to the tempered glass, and then use the
Allen wrench to tighten the fixing screws (
(See Picture 3)
(See Picture
) on both sides of the build platform.
1 2
（Picture 2）
（Picture 1）
2). When the build platform
2
1
（Picture 3）