Elegoo Neptune Pierwsze użycie

Przeglądaj online lub pobierz pdf Pierwsze użycie dla Drukarki 3D Elegoo Neptune. Elegoo Neptune 2 stron.

Please refer to the included USB Drive for a Setup and Installation Instructional Video.

1. Power Supply Voltage Selection:

l Please adjust the voltage to match your local

voltage before first use, switch to 115V (for

operation 100-120V) , or to 230V (for operation 220-

240V).（The default factory voltage setting is

Voltage Requirements for some countries:

①CA/US/JP:100-120V

②DE/FR/UK/AU/RU/IT/ES: 220-240V

2. Y-Axis Slider Plate Wobble:

l The Y-axis slider plate is adjusted at the factory, but the machine's pulleys may be loose due to transportation. If

the printing platform is shaky or loose, you can use an open-end wrench to slowly unscrew the hexagonal isolation

column under the platform until the Y-axis slider plate slides smoothly without shaking!

l Similarly, you can adjust the hexagonal isolation column underneath the print head if it becomes wobble or loose.

There are also corresponding isolation columns for the pulleys on both sides of the gantry that can be adjusted.

Notice Before First Use

230V）