Anker EUFY T8910 Podręcznik użytkownika - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Akcesoria Anker EUFY T8910. Anker EUFY T8910 9 stron. Motion sensor

Mount the Motion Sensor

1. There are two methods of mounting the motion sensor at the selected location:

•

Use the 3M adhesive strip:

① Snap the adjustable wall mount onto the motion sensor base.

② Stick the adhesive strip on the back of the sensor, remove the film, and stick

the motion sensor on the wall.

③ Rotate the motion sensor to adjust the detection coverage.

•

Use the provided screws:

① Place the mount against the wall and use a pencil to mark the desired

location for mounting.

08 English

② Drill holes at each marking. No need to drill a pilot hole in the wooden walls.

③ Insert anchors into the holes, and fix the mount onto the wall with the

provided screws. No anchors are needed on wooden walls.

④ Clip the motion sensor back onto the mount.

⑤ Rotate the motion sensor to adjust the detection coverage.

English 09