AnkerWork H300 Faq - Strona 4
Przeglądaj online lub pobierz pdf Faq dla Zestawy słuchawkowe AnkerWork H300. AnkerWork H300 5 stron.
Również dla AnkerWork H300: Podstawowe działanie (8 strony)
Call-Related Issues
What should I do if there is no sound from the headset after answering a call on
my iPhone?
When the headset is connected to an iPhone, if you answer the call by pressing the
answer/hang up button on the headset, the phone will select the headset as the output device.
If you answer the call on your iPhone, it will select the phone's speaker as the output device.
To change the output device, please go to Accessibility > Touch > Call Audio Routing. Select
"Bluetooth headset" as the default output device.
What should I do in the following situations?
- People can't hear my microphone.
- People can't hear my microphone clearly.
- People say my microphone cuts in and out.
1. Adjust your mic boom and confirm it's not muted.
2. Check the input settings for your device and conferencing software.
If your settings are correct, check if you can test your speaker and microphone on your
conference software. Not all conferencing software has this feature.
3. Adjust the noise reduction level of your conferencing software. The headset's
environmental noise cancellation algorithm and your conferencing software's noise reduction
mode can trigger different effects.
What should I do if I experience these situations during a call?
- I cannot hear others.
- I hear audio, but it's poor.
- The audio cuts in and out.
1. Check the audio input and output settings on your computer.
2. Check if your microphone is muted.
3. Restart your conferencing software and check the network settings. Then, try again.
4. Upgrade the Bluetooth dongle and firmware version of AnkerWork H300.
5. Make sure your headset is close to your device.
6. Update the headset firmware via the AnkerWork app. Update the dongle via the AnkerWork
software.
7. Update the connected device and your conference software.
Note: If you make a call while playing games, the sound quality may decrease.