DROPSA VIP4ToolsPro Instrukcja obsługi i konserwacji - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Systemy smarowania DROPSA VIP4ToolsPro. DROPSA VIP4ToolsPro 12 stron.

Characteristic

Pressure at point of connection

Max. quantity of particles in suspension

Max. diameter of particles

Dew point

Max. quantity of oil in suspension

Whenever not utilizing natural base oils compatible with existing health regulations, it is necessary to adjust

the mixer pressure so as to avoid the formation and dispersion of oil mist into the environment.

The mixing pressure is indicatively between 1 bar (14.7 psi ) and 2.5 bar (36.7 psi).

14. CONTRAINDICATIONS

The VIP4ToolsPro panel does not have any particular contraindications except for the following points:



The operator coming into contact with fluid due to breakage/opening of supply tubing.



The operator must be furnished with suitable personal protection clothing/equipment (according to

current regulation).



Abnormal posture.



Take note of the indications shown in paragraph 6.2.



Contact with oil during filling/maintenance.



The operator must be furnished with suitable personal protection clothing/equipment (according to

current regulation).Use of unsuitable lubricants.

Main inadmissible fluids.

Lubricants with abrasive additives

Lubricants with silicon based additives

Petrol – solvents – flammable liquids

Corrosive products

Water

Food substances

Fluid

Requirement

Min. 6 Bar (88.2 psi)

15 mg/Nmc

0.05

2° C (35.6 °F)

5 mg/Nmc

Danger

High wear rate of contacted parts

Seizure of the pump

Fire – explosion – damage to seals

Corrosion of the pump– injury to persons

Oxidation of the pump

Contamination of the substances themselves