3M PELTOR WS LiteCom Pro III Series Podręcznik - Strona 10
Przeglądaj online lub pobierz pdf Podręcznik dla Zestawy słuchawkowe 3M PELTOR WS LiteCom Pro III Series. 3M PELTOR WS LiteCom Pro III Series 13 stron.
Drukuj stronę
GB
• Operating temperature range: -20°C to 50°C (122°F)
• Storage temperature range: -20°C to 50°C (122°F)
5.1 Removing and replacing cushions
H:1
H:2
H:1 To remove the cushion, slide your fingers under the edge
of the cushion and firmly pull straight out.
H:2 To replace, insert the foam liners.
H:3 Then, fit one side of the cushion into the groove of the
cup and then press on the opposite side until cushion snaps
in place.
5.2 Replacing the helmet attachment plate
I:2
I:1
For proper fitting on different industrial safety helmets, the
helmet attachment plate may need to be replaced. Find the
recommended attachment in Table B. The headset comes
assembled with P3E helmet attachment, while other plates
can be obtained from your dealer. A screwdriver is needed to
replace the helmet attachment plate.
I:1 Loosen the screw holding the plate and remove the plate.
I:2 Attach the appropriate plate while ensuring the left (L) and
right (R) designated plates are on the appropriate earmuff, if
applicable, and then tighten the screw.
6. SPARE PARTS AND ACCESSORIES
3M
PELTOR
HY83 Hygiene kit
TM
TM
Replaceable hygiene kit consisting of two sets of foam liners
and two snap-in ear cushions. Replace at least twice a year
to ensure constant attenuation, hygiene and comfort.
3M
PELTOR
HY100A Clean – single-use protectors
TM
TM
Single-use protector for the ear cushions. Package of
100 pairs.
3M
PELTOR
HYM1000 Mic Protector
TM
TM
Moisture and wind-tight tape. Protects the speech micro-
phone. Package of 5 meters for about 50 replacements.
3M
PELTOR
M171/2 Wind shield for MT73 speech
TM
TM
microphones
Wind noise protector for MT73-type speech microphones.
Two per package.
3M
phones
Wind noise protector for ambient sound microphones. One
pair per package.
H:3
3M™ PELTOR™ MT73 Dynamic microphone
Microphone boom with dynamic differential microphone
PELTOR
M60/2 Wind shield for ambient micro-
TM
TM
Intrinsically Safe Spare Parts
3M
PELTOR
ACK082 Rechargeable Li-Ion
TM
TM
batterypack (only for WS™ LiteCom Pro III Headset
Ex)
3M
PELTOR
AL2AH Battery charging cable for
TM
TM
ACK082
3M
PELTOR
FR08 Power Supply
TM
TM
3M
PELTOR
FL5602-50 External PTT for WS
TM
TM
LiteCom Pro III Headset, ATEX
Push-To-Talk button with connection cable for external
control of transmission with the radio in the
3M™ PELTOR™ WS
LiteCom Pro III Headset.
TM
3M
PELTOR
MT90-02 Throat microphone
TM
TM
Non Intrinsically Safe Spare Parts
3M™ PELTOR™ ACK081 Battery
3M™ PELTOR™ AL2AI Battery charging cable for
ACK081
3M
PELTOR
FR08 Power Supply
TM
TM
3M
PELTOR
FL5602 External PTT for WS
TM
TM
Pro III Headset
Push-To-Talk button with connection cable for
external control of transmission with the radio in the
3M™ PELTOR™ WS
LiteCom Pro III Headset.
TM
3M™ PELTOR™ FL6CS Connecting cable
With 2.5 mm stereo connector for use with DECT and
mobile telephones.
3M™ PELTOR™ FL6BT Connecting cable
With 3.5 mm mono connector for use with a communica-
tion radio.
3M™ PELTOR™ FL6BR Connecting cable
With PELTOR™ J11 connector (type Nexus TP-120) for
use with a PELTOR™ adapter and an external commu-
nication radio. Contact your Authorised 3M™ PELTOR™
LiteCom Pro III Headset dealer for information.
3M
PELTOR
MT90-02 Throat microphone
TM
TM
TM
LiteCom
TM