anko LD-K1047 Podręcznik użytkownika - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Urządzenia kuchenne anko LD-K1047. anko LD-K1047 9 stron. Cordless tea maker

* Before taking out the tea filter, wait for the temperature to cool down.

* CAUTION! The heating element and surfaces are subject to residual heat after use.

* WARNING – Avoid water spillage on the electrical connectors.

* WARNING – Potential injury from misuse.

* WARNING – Do not remove the lid while the water is boiling.

IMPORTANT!

* To prevent damage from any steam escaping from the appliance turn the spout away from

furniture, walls, wallpaper and overhead cabinets or other items.

* Do not use caustic, aggressive or abrasive cleaning products for cleaning.

Keep hard items away from the appliance.

* Although the appliance is protected from boiling dry, it must never be operated without water.

* If the overheat cut-out switch switches OFF the appliance to prevent overheating and boiling

dry, proceed as follows:

- Remove the appliance from the base.

- Allow the appliance to cool down for at least 15 minutes before refilling it with cold water and

replacing the appliance back on the power base.

* Only use the appliance with the power base provided.

* Furniture today is often coated with a wide range of varnishes and plastics and is treated with

various protective substances. Some of these products may contain substances that react

adversely with the rubber feet on the power base, soften them and cause staining on the

surface. Therefore, we recommend placing a non-slip mat under the rubber feet on the power

base.

Unpacking

DANGER to children- danger to life due to suffocation/swallowing

Keep the packing material out of children's reach. Dispose of it immediately.

* Carefully remove all parts from the packaging and check that no parts are missing or possibly

damaged.

* Remove all packaging material.

First time use

IMPORTANT! During the below process, DO NOT fill the tea maker more than the MIN

(0.5L) mark on the tea maker. Filling above the MIN mark will cause overboiling and

spillage out of the spout.

To ensure a long service-life of the tea maker, proceed as follows before using it for the first

time:

--USE—