anko HEG40A Podręcznik użytkownika - Strona 10
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Wentylator anko HEG40A. anko HEG40A 12 stron. 40cm pedestal fan
Drukuj stronę
4 Instructions for Use
Remove the cable tie and unravel the cordset before operation.
DO NOT run the power cord under the stand
The fan and motor assembly are attached to a 4-position
ratchet.
Tilt up or down until the assembly clicks into the desired
position.
Rotate the Speed Switch to position 1 for a low speed, 2 for a medium speed and 3 for
a high speed.
Rotate the Speed Switch to position 0 to switch the Fan off.
To blow air in one direction and stop oscillation, allow the Fan head to move into the
desired position and then pull the clutch knob up.
Press the clutch knob down to return to a normal oscillating function.
IMPORTANT: DO NOT run the power cord under the stand.
5 Care and Cleaning
Ensure that the fan is switched off from the supply mains before removing the guard.
•
Turn off and unplug the unit prior to cleaning.
•
•
Clean the motor housing and body assembly with a clean, damp cloth and wipe dry.
Never spray with liquids or submerge the Pedestal Fan in water or any other liquid.
•
Do not use flammable liquids, chemicals, abrasive creams, steel wool or scouring
•
pads for cleaning.
6 Storage
Switch off and unplug the fan.
•
Coil the cable loosely. Do not kink or pull the cable tight.
•
Store your fan in a cool, dry location.
•
Page 10 of 12